Tube-CrossingSaddle
Tube-CrossingSaddle connects a round tube to a round tube. The connection creates a saddle cut to the secondary tube.
Objects created
-
Cuts
-
Welds
Use for
Situation |
Description |
---|---|
|
Crossing saddle connection. |
Limitations
-
No support for polybeams or contour plates.
Selection order
-
Select the main part (round tube).
-
Select the secondary part (round tube).
The connection is created automatically when the secondary part is selected.
Parameters tab
Use the Parameters tab to control the saddle cuts.
Connection options
Option |
Description |
---|---|
|
Crossing Saddle Creates a crossing saddle to the secondary part. |
Tube NC Parameters
Option |
Description |
---|---|
Bevel angle |
The weld preparation angle created during NC processing of the tube. The bevel is created to the secondary part. |
Root opening above |
The gap between the parts. The gap is created in the model. |
Shrinkage |
The shrinkage considered during NC processing of the tube. The shrinkage value has no effect on the model. |
Maximum torch angle |
Maximum torch angle. The default is 70.0. |
Minimum torch angle |
Minimum torch angle. The default is -70.0. |
Bevel angle information is used only in NC data, and no actual weld preparations are created in the model.
Welding tab
Click the link below to find out more:
General tab
Click the link below to find out more:
Analysis tab
Click the link below to find out more: