XS_USE_CROSS_FOR_OPENING_SYMBOL

Category

Drawing Properties

Use XS_USE_CROSS_FOR_OPENING_SYMBOL to select how the openings/recesses are shown and the symbols to be used.

The default value is TRUE , which means that a cross is used as the opening/recess symbol.

This advanced option is model specific and the setting is saved in the options database.

Value	Description
`TRUE` This is the default.	Crosses are used as symbols for openings as follows: If the recess is on the front face of the part, recess symbol and bounding lines are shown as unbroken lines as follows: If the recess is on the back face of the part, recess symbol and bounding lines are shown as dashed lines as follows:
`FALSE`	Shadows are used as symbols for openings as follows: If the recess is on the front face of the part, there is no recess symbol, and bounding lines are shown as unbroken lines as follows: If the recess is on the back face of the part, there is no recess symbol, and bounding lines are shown as dashed lines as follows:

Value

Description

TRUE

This is the default.

Crosses are used as symbols for openings as follows:

If the recess is on the front face of the part, recess symbol and bounding lines are shown as unbroken lines as follows:

If the recess is on the back face of the part, recess symbol and bounding lines are shown as dashed lines as follows:

FALSE

Shadows are used as symbols for openings as follows:

If the recess is on the front face of the part, there is no recess symbol, and bounding lines are shown as unbroken lines as follows:

If the recess is on the back face of the part, there is no recess symbol, and bounding lines are shown as dashed lines as follows: