Change the cover thickness of a reinforcing bar
|
Drag a line handle to the desired location.
|
Reinforcing bars, reinforcing bar groups, reinforcement meshes
|
Add polygon points to a reinforcing bar
|
Drag a midpoint handleto the desired location.
|
Reinforcing bars, reinforcing bar groups, polygonal and bent reinforcement meshes
|
Add points to the start or end of a reinforcing bar
|
- Click the start or end reference point of the reinforcing bar.
- Click the Add new point button on the toolbar.
- Pick a location for the new start or end point.
|
Reinforcing bars, reinforcing bar groups
|
Remove points from a reinforcing bar
|
- Select one or more reference points.
- Press Delete.
|
Reinforcing bars, reinforcing bar groups, polygonal and bent reinforcement meshes
|
Add hooks
|
- Click the start or end point of the reinforcing bar.
A toolbar for hook properties appears.
- Select the desired shape for the hook.
- If you selected Custom hook , enter the angle, radius, and length for the hook and click.
|
Reinforcing bars, reinforcing bar groups
|
Change the bending radius of a reinforcing bar
|
- Click the Change bending radius button on the toolbar.
- Enter a value in the box next to the Change bending radius button and press Enter.
|
Reinforcing bars, reinforcing bar groups
|
Change the diameter of a reinforcing bar
|
- Click the Change diameter button on the toolbar.
- Select a value from the list next to the Change diameter button.
|
Reinforcing bars, reinforcing bar groups, reinforcement meshes
|
Modify the spacings by adjusting the range
|
- Click the Modify spacings button on the toolbar.
- Drag a handleto the desired location.
|
Reinforcing bar groups, reinforcement meshes
|
Modify the spacings by splitting the range in two
|
- Click the Modify spacings button on the toolbar.
- Drag a midpoint handleto the desired location and release the handle.
Tekla Structures creates a new reinforcing bar and the range is split in two. The spacing in the two new ranges is as close as possible to the original spacing.
- If needed, change the number of spaces or the spacing value. Click the midpoint handle and enter the desired values in the boxes on the toolbar and press Enter.
|
Reinforcing bar groups, reinforcement meshes
|
Move, add, or remove reinforcement
|
- Click the Move, add, delete reinforcement button on the toolbar.
Tekla Structures displays the line handles for each reinforcing bar.
Do one of the following:
- To move a reinforcing bar, highlight it and drag it to the desired location.
- To add a reinforcing bar between two reinforcing bars, click.
- To delete reinforcing bars, select them and press Delete.
|
Reinforcing bar groups, reinforcement meshes
|