Reinforcement and neighbor reinforcement mesh mark elements

Tekla Structures
2019i
Tekla Structures

Reinforcement and neighbor reinforcement mesh mark elements

You can define mark contents separately for reinforcement meshes.

The following elements are specific to the reinforcement and neighbor reinforcement mesh marks, other elements are the same as for reinforcement marks. Some of the available elements are not listed here, because they are common to many types of marks, and listed separately.

Element

Description

Size

Adds the nominal diameters of the mesh bars, dimensions of the mesh, and the spacings of the bars in the longitudinal and crossing directions.

Mesh length

Adds the length of the reinforcement mesh.

Mesh width

Adds the width of the reinforcement mesh.

cc

You can define cc individually for the longitudinal and crossing bars in the mesh.

Adds the center-to-center spacing of the bars. The options are:

  • cc longitudinal / cc crossing adds the spacing value if spacing does not vary

  • cc min longitudinal / cc min crossing adds the smallest spacing value of the bar group if spacing varies

  • cc max longitudinal / cc max crossing adds the largest spacing value of the bar group if spacing varies

  • cc exact longitudinal / cc exact crossing lists all spacing values of the bar group

  • cc target lists all reinforcing bar target spacing values

Diameter longitudinal

Adds the diameter or size of the longitudinal bars.

Diameter cross

Adds the diameter or size of the crossing bars.

Was this helpful?
Previous
Next