Display dimension associativity
You can change the dimension pointpoint that Tekla Structures or the user has used for dimensioning
associativitydrawing property that represents the linking of drawing objects to model objects so that the former are updated according to changes made to the latter in the modeling mode
In Tekla Structures, associativity only relates to one type of drawing objects, namely associative objects. These can be building objects and associative annotation objects.
In Tekla Structures, the term associativity has traditionally been used when referring to the linking of drawing objects to model objects. In other modeling contexts, however, the term associativity may refer to any kind of linking between model objects or parts of a model by using dependencies.
to avoid incorrect associativity, or to simply make the associativity selection distinct. Each dimension point associativity anchor shows a list of objects that have locations available for association. You can change the dimension point associativity in straight dimensions only.
Dimensioning points created in Tekla Structures are associated to the objects where the dimension points have been added. This allows the dimensions to update automatically when the objects are changed during modeling.
Sometimes the dimension point locations may be unclear due to orthogonalview projection that displays objects in right-angles projection
In orthogonal model view the size of the objects is the same despite of their distance to the viewing point and the zoom remains on part faces.
projection. A dimension point might be not be associated to the desired object because there are various other objects in the same point location. In drawing update or cloning, this may lead to unwanted dimensioning values or associativity.
It is also possible to associate dimensions to object center lines outside the object area.
Change dimension point associativity
- Select the desired dimension or dimension set.
- Click a dimension point associativity anchor.
This displays the dimension associativity rule list, which shows the objects where the dimension point can be associated. The default associativity rule is automatically selected by Tekla Structures.
- Click a rule in the list to select it and associate the dimension point to a new object.
When you click the rule, the corresponding object is highlighted in the drawing. This makes it easy for you to to check if the selected rule refers to the object you want.
- You can also do the following:
Open a several dimension associativity rule lists at a time by holding down Ctrl or Shift and clicking dimension point associativity anchors, or holding down Alt and using area selectionmethod of selecting objects that are included in a certain rectangular area of a model
In addition to the selected area, selection switches and selection filters control which object types are selected.
Open all associativity rules related to the selected dimension, click a dimension and select Show dimension associativity rules from the contextual menu.
You can alter associativity rules by scrolling the mouse wheel while mouse cursor hovers over a rule list.
To select associativity rules related to same object types in all opened rule lists, double-click the desired rule. Selected rules will be highlighted with yellow color in all opened rule lists.
You can control the maximum number of shown rules in the rules list with the advanced option XS_INTELLIGENCE_MAX_RULE_COUNT. If the needed associativity option is missing from the rule list, increase the number of the shown rules by changing the XS_INTELLIGENCE_MAX_RULE_COUNT value.
- Click the drawing background to close the rule list.
The following attributes are shown in the rule list for the following building objects:
Steel parts: "NAME", "PART_POS", "PROFILE"
Concrete objects: "NAME", "PROFILE"
Polygon cuts: "NAME", "PROFILE"
Reinforcement: "NAME", "REBAR_POS"
Gridmodeling aid that represents a three-dimensional complex of intersecting grid planes or intersecting grid planes and curved grid surfaces
The grid is defined by coordinates in 3D space. It is shown two-dimensionally on the view plane by dash-and-dot lines. A grid can be rectangular or radial.
It is possible to have more than one grid in a model. For example, a large-scale grid for the entire structure, and smaller grids for some detailed sections.
It is also possible to show grids and grid line labels in drawings, and to modify how they are shown in the drawings.
: Grid "NAME"
Intersection of grid linesingle line that visualizes a grid plane or a curved grid surface on a view plane
and building objectobject that represents something that will exist in the real building or will be closely related to it
A building object is always created in a model, but it is also represented as a drawing object in a drawing in which its properties can be modified.
side: Grid “NAME” or the label of the building object:
Intersection of grid lines: Grid “NAME”/”NAME”:
Pour units: Pour objectbuilding object that is formed of one or more cast-in-place concrete parts, or parts of cast-in-place concrete parts
The cast-in-place concrete parts are merged into one pour object if they have the same material grade and pour phase, and if they touch each other. Pour objects are visible in pour view.
"POUR_TYPE", # "POUR_NUMBER"
If the Default option is selected, the dimension point will automatically select which object to follow during the dimension update based on the new position of the objects. Note that there might not be any rule in the rules list that would correspond the behavior of the Default option. Selecting another option than the Default option makes it possible to guarantee which object will be followed during the dimension update.
Display dimension associativity with Clone and Clone selected commands:
Changing associativity rules in selected dimension points allows you to achieve more accurate results in cloning dimensions in drawings. An associativity option selected in a rule list will be preserved in the cloned dimension if the selected rule corresponds to a similar object in a cloned drawing or in a target selection in a GA drawingdrawing that is created from one or more model views and that shows information needed to understand the general arrangement of structural elements on a project
General arrangement drawings show how parts, assemblies, cast units, or pour objects are located in a building.
. Objects are not considered to be similar if they have been modeled by using different commands, such as steel beam, steel plate(1) part that represents a flat structure
(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.
(2) plate that represents a steel structure
(2) Plate is mainly used as a connection piece or as a floor plate.
, reinforcement, or bolt. When an appropriate object is missing in the cloned drawing or in the target selection in a GA drawing, the dimension point will be associated to an object that is located in the same coordinate points. In this case, the associativity rule in the point in question will be returned to the Default option.
Note that when the drawing is cloned automatically due to renumbering, the associativity rules are recomputed from scratch and any preferred rules set by the user are lost.