Hello!

Did you know that logged in users can see a lot more content?

Two-sided seating with dowel to flange (78)

Last updated September 10, 2019 by Tekla User Assistance tekla.documentation@trimble.com

Software version: 
2019i

Two-sided seating with dowel to flange (78)

Two-sided seating with dowel to flange (78)

Two-sided seating with dowel to flange (78) connects the flanges of two beams to a column using anchor bolts and optional corbels.

Parts created

  • Anchor bolts (4)

  • Nuts (4)

  • Washer plates (4)

  • Bearing plate(1) part that represents a flat structure

    (1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

    (2) plate that represents a steel structure

    (2) Plate is mainly used as a connection piece or as a floor plate.

    (2)

  • Fittings for beam and column

  • Holes for bolts (4)

  • Corbels (2) optional

  • Recesses for nut and washer plate (4)

Use for

Situation Description

Connects the flanges of two beams to a column using anchor bolts.

Connects the flanges of two beams to a column using anchor bolts and beveled corbels.

Before you start

Create the following parts:

  • Concrete column (Round or rectangular profile)

  • Concrete beam with flange (rectangular, HI, I, L, or inverted T profile)

Selection order

  1. Select the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

    (1) Main part can be an assembly main part or a cast unit main part.

    (2) input part that the user selects first when creating a component

    (2) Connections and details always have a component main part.

    (column).

  2. Select the secondary part(1) part that exists in a building object and that is connected to the main part

    (1) Secondary part can be an assembly secondary part or a cast unit secondary part.

    (2) input part that the user selects after selecting the component main part when creating a component

    (2) A component can have none, one or more component secondary parts.

    (beam).

  3. Select the second secondary part (beam).

  4. Click the middle mouse button to create the connection.

Picture tab

Use the Picture tab to define dimensions and the position of the anchor bolts relative to the beam and bearing plate, length of anchor bolts, and beam ends.

Beam and column

Select one of the following options to define how the end of the beams are cut and shaped:

Key

Options

1 = column

2 = first beam picked

3 = second beam picked

Bearing plate

Select one of the following options to define the position of the bearing plate:

Option

Description

Square with beam.

Default

Square with column.

Square with column.

Enter the distances from column edges.

Dowel tab

Use the Dowel tab to define dowel properties.

Select to create the dowel as a reinforcement bar, poly-profile, or custom componentcomponent that the user creates and uses for creating model objects whose composition the user can modify as a group

part from the Type list.

Option

Description

Profile

Select the dowel profile from the profile catalog.

Prefix , Start number

Prefix and start number for the part position number.

Material

Material grade.

The default material is defined in the Part material box in the Components settings in File menu > Settings > Options .

Name

Name that is shown in drawings and reports.

Finish

Describes how the part surface has been treated.

Class

Enter a number to group the parts that the component creates. By default, the class number affects the color in which the part is shown in model views.

Size

Diameter of the bars.

Grade

Strength of the steel used in the bars.

Parts tab

Use the Parts tab to define bearing pad, drainage holesmall hollow open throughout a part or assembly that is usually used for fastening parts with bolts or other such objects

Hole is created in the same way as bolts and hole properties are defined in the bolt properties.

, bolt plate, and nut properties.

Option

Description

t , b , h

Define the part thickness, width and height.

Pos_No

Define a prefix and a start number for the part position number.

Material

Define the material grade.

Name

Define a name for the part.

Class

Use Class to group the parts.

Left beam/Right beam tab

Use the Left beam/Right beam tab to define anchor bolt, bolt hole and recess properties.

Left beam is the first beam picked and right is the second.

Bolt hole

Enter the following bolt hole dimensions:

Field

Description

1

Hole dimension in the direction of the beam.

2

The distance from beam center line to hole center and bolt.

3

Hole dimension in the direction perpendicular to the beam.

Select the shape of the bolt hole:

Option

Description

Rectangular

Default

Round

Nut and bolt plate

Field

Description

1

Nut width.

2

Bolt plate width.

Recess

To cut a recess in the beam web, select the Yes option in the Create recess list. Enter the following dimensions to define the recess:

Left corbel/Right corbel tab

Use the Left corbel/Right corbel tab to create a corbelconcrete part representing a structure that projects from the face of a concrete part and that serves as a support for an overhanging part and connects the parts

and define its properties.

Select to create a corbel from the Create corbel list.

The options for chamfering corbels are:

Option

Description

Beveled

Default

Straight

Rounded

Define the placement of the corbel rebar.

Option

Description

t, b, h

Define the thickness, width, and height of the part.

Pos_No

Prefix and start number for the part position number.

The default part start number is defined in the Components settings in File menu > Settings > Options .

Name

Name that is shown in drawings and reports.

Class

Part class number.

General tab

Click the link below to find out more:

General tab

Analysis tab

Click the link below to find out more:

Analysis tab

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet