The BW Industries' Non-Standard Anti-Sag macrosaved series of actions that includes instructions for a program
Macros are located in the applications and components catalog. They are recorded or created manually and stored as .cs file in a folder defined with the advanced option XS_MACRO_DIRECTORY.
Macros can, for example, be used for creating drawings or reports.
Macros are sometimes used to run an application.
can be used to define spring fixes and angle braces individually between selected purlins.
Before and after
- Any modification of the selected parts will cause this macro to be updated.
- Most of the data required for this macro is fixed by BW and stored in a series of data files supplied with Tekla Structures. Where standard data is not applicable, then certain items can be modified through the Parameters tab of the properties panel, but it is also possible to tailor the data files to individual requirements. This would require assistance from Tekla Structures support.
- All purlin lengths must be parallel.
- All purlins must have the same offset from the rafter.
Selection order example
When selecting a position ensure Snap to nearest points (points on line) is turned on.
- Pick a position along a purlin