Category
Drawing Properties
This advanced option lengthens unfolded tubes by the following multiplication factor:
factor = 1.0+2* XS_TUBE_UNWRAP_PAPER_THICKNESS /diameter
The default value is 0.0.
Note: If the advanced option XS_TUBE_UNWRAP_WITH_CUT_HOLES is set to TRUE , this advanced option has no effect.
This advanced option is model specific and the setting is saved in the options database.
Example
Tube d=219
When you set the advanced option to 0, the unwrapped length of the tube (1.0*PI*diameter) = 688.
When the advanced option is set to 10, the length of the unfolded tube = factor * diameter* PI = (1.0 + 2*10/219) * 219 * 3.14 = 751
