Single Part View in Assembly Drawing
Use to set a dimension type for single-part views included in assembly drawings. The options are:
1 = Relative, point to point dimensions. This is the default value.
2 = Absolute, dimensions from a common start point.
3 = Relative and absolute, a combination of point to point and common start point.
4 = US absolute, dimensions from a common start point, which include a running dimension markpart of a dimension that displays the basic information about the building object measurements
A dimension mark can consist of a prefix, numerical value, and postfix.
16 = US absolute 2, similar to US absolute, but it changes short dimensions to relative.
35 = Absolute plus short relatives, which is similar to Absolute, but it changes short dimensions to relative. Also called internal absolute. This option may show both dimensions, but it does not show relative dimensions when dimensions are long. This option shows the absolute dimensions inside the dimension lines.
99 = Absolute plus all relatives above the absolutes, which is similar to Relative and absolute, but it places the relative dimensions above the absolute.
This advanced option is model specific and the setting is saved in the options databasedatabase file that contains the settings of model-specific general settings and advanced options
There are two options databases, the model options database (options_model.db) and the drawing options database (options_drawings.db).