Category : Concrete Detailing
Set this advanced option to TRUE to enable pour management in the currently open model and to show cast-in-place concretecast unit type where the concrete is formed, poured, and cured in its final position
structures as continuous. The commands that show and create pour objects and pour breaks in the model and drawings are only available when pour management is enabled.
The default value for new models in the Concrete contractor role is TRUE. In the other standard roles, the default value for new models is FALSE.
This advanced option is model specific and the setting is saved in the options databasedatabase file that contains the settings of model-specific general settings and advanced options
There are two options databases, the model options database (options_model.db) and the drawing options database (options_drawings.db).
If pour management is enabled in the model, do not disable it using XS_ENABLE_POUR_MANAGEMENT , especially in the middle of the project. This may cause problems if you have drawings containing pour objects, and if you are sharing your model. The pour objects and pour breaks in the model and in the drawings may get invalid, and you may lose pour-related modeling work.