Hello!

Did you know that logged in users can see a lot more content?

2019 Table of Contents

XS_​ENABLE_​PHASE_​OPTION_​IN_​NUMBERING

Last updated March 12, 2019 by Tekla User Assistance tekla.documentation@trimble.com

Software version: 
2019

XS_​ENABLE_​PHASE_​OPTION_​IN_​NUMBERING

XS_​ENABLE_​PHASE_​OPTION_​IN_​NUMBERING

Category : Numbering

When this advanced option is set to FALSE (which is the default value), the Assembly phase check box is disabled in the Numbering Setup dialog box. This means that changing an object's phase does not affect numberingprocess of assigning position numbers to parts, cast units, assemblies, or reinforcement

In Tekla Structures, the position numbers assigned in the numbering are shown in marks and templates, for example.

or trigger change alerts.

If this advanced option is set to TRUE , the Assembly phase check box is enabled in the Numbering Setup dialog box. This is the recommended setting for Tekla Model Sharingcloud service for collaboration and for storing and sharing a model

Tekla Model Sharing is one of the Tekla online services.

users.

If you select the Assembly phase check box, only the assembly phase of each assembly is compared in numbering. This means that otherwise identical objects with different assembly phase get the same part position numberposition number that is assigned to a part

.

Note! Even if you do not select the Assembly phase check box, but you change the phase of an object when XS_ENABLE_PHASE_OPTION_IN_NUMBERING is set to TRUE :

  • A question mark (?) is added to the object's position numberidentifier that is assigned to all similar parts, assemblies, cast units, or reinforcement

    Position number consists of a prefix, separator, and running number. The prefix is part of the position number, identifying a numbering series. The running number is part of the position number, and is the assigned number in the numbering series, based on the start number. The separator is an optional character, such as a slash, that separates the prefix and the running number.

    In Tekla Structures, the position numbers assigned in the numbering are shown in marks and templates, for example.

    In the US, the term piece mark or ship mark is used to refer to a position number.

    indicating that numbering is needed.
  • After renumbering, the Document manager indicates that the drawings need updating.
  • In shared models, the Changes list shows the changed parts and assemblies.

This happens even if you are using the Project Viewer configuration.

This advanced option is model specific and the setting is saved in the options databasedatabase file that contains the settings of model-specific general settings and advanced options

There are two options databases, the model options database (options_model.db) and the drawing options database (options_drawings.db).

.

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet