Hello!

Did you know that logged in users can see a lot more content?

2019 Table of Contents

XS_CONTOUR_PLATE_POINT_ON​_SAME_LINE_LIMIT_FOR​_​CLOSE_​POINTS

Last updated March 12, 2019 by Tekla User Assistance tekla.documentation@trimble.com

Software version: 
2019

XS_CONTOUR_PLATE_POINT_ON​_SAME_LINE_LIMIT_FOR​_​CLOSE_​POINTS

XS_CONTOUR_PLATE_POINT_ON​_SAME_LINE_LIMIT_FOR​_​CLOSE_​POINTS

Category

Modeling Properties

Cleans away system componentcomponent that is included in a Tekla Structures configuration and whose component objects and composition the user can modify within the limits of the component properties

provided contour platepart whose outline form the user defines by picking three or more points

The user can define the shape of the contour plate parallel to the work plane. The profile in use defines the thickness. The corners of the contour plate can be chamfered.

profile points in cases where points are on an almost straight line if the provided (middle) points deviate from the line at most as much as the value of this advanced option. The point is then so close to the line between the previous and next point that it is redundant and can be removed. This advanced option is used if section point distances between two consecutive points are smaller than 10.0 mm. The default value for this advanced option is 0.1 mm.

This advanced option is model specific and the setting is saved in the options databasedatabase file that contains the settings of model-specific general settings and advanced options

There are two options databases, the model options database (options_model.db) and the drawing options database (options_drawings.db).

.

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet