Did you know that logged in users can see a lot more content?

2019 Table of Contents


Last updated March 12, 2019 by Tekla User Assistance tekla.documentation@trimble.com

Software version: 



Category : Numberingprocess of assigning position numbers to parts, cast units, assemblies, or reinforcement

In Tekla Structures, the position numbers assigned in the numbering are shown in marks and templates, for example.

Use to base assembly numbers on drawing numbers. Use the following switches to define the contents of assembly marks. Use as many switches as you need, and enclose each one in percent symbols (%).

The available switches are:




Multidrawing name.


Position of the assembly drawing inside the multidrawing.


Assembly prefix in the model.


Assembly position number in the model.

Template fields

Enter TPL: followed by the name of any relevant template field. Enclose each name in percent symbols (%). For example, %TPL:PROJECT.NUMBER%

NOTE: No template fields starting with DRAWING work for this advanced option, for example, DRAWING.TITLE1. If you use them in the value, Tekla Structures will replace the whole value string with the default value.

User-defined attributes that are defined in the objects.inp file

Enter UDA: followed by the name of any relevant user-defined attribute, exactly as it appears in the objects.inp file. For example, %UDA:MY_INFO_1%

This advanced option is model specific and the setting is saved in the options databasedatabase file that contains the settings of model-specific general settings and advanced options

There are two options databases, the model options database (options_model.db) and the drawing options database (options_drawings.db).



To put the assembly multinumbers in the format multidrawingdrawing that gathers together several drawings on one sheet

The individual drawings in a multidrawing may be of any drawing type.

name + part prefix + position on multidrawing, set the advanced option as follows:


This will create the assembly mark 10B1, where:

  • 10 is the drawing number

  • B is the assembly prefix

  • 1 designates that it is the first assembly on the sheet.

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet