Hello!

Did you know that logged in users can see a lot more content?

2019 Table of Contents

XS_​AISC_​WELD_​MARK

Last updated March 12, 2019 by Tekla User Assistance tekla.documentation@trimble.com

Software version: 
2019

XS_​AISC_​WELD_​MARK

XS_​AISC_​WELD_​MARK

Category : Welds

Set this advanced option to TRUE to create AISC weld marks, to use leg length as default fillet weld size dimensioning, and to create arrow side weld using below line weld properties.

Set this advanced option to FALSE to create ISO weld marks, to use throat thickness as default fillet weld size dimensioning, and to create arrow side weld using above line weld properties. FALSE is the default value.

This advanced option also affects the spacing of intermittent welds:

  • TRUE uses the Pitch value entered in the weld properties as the center-to-center spacing of welds.

  • FALSE uses the Pitch value entered in the weld properties as the spacing between the welds.

An AISC weld markmark that includes a set of selected property elements related to a weld

of a staggered intermittent weld with the pitch after a dash:

An ISO weld mark of a staggered intermittent weld with the pitch in parenthesis:

This advanced option is model specific and the setting is saved in the options databasedatabase file that contains the settings of model-specific general settings and advanced options

There are two options databases, the model options database (options_model.db) and the drawing options database (options_drawings.db).

.

Note:

The XS_AISC_WELD_MARK advanced option is delivered with model folderfolder that is used for storing files associated with a model

Tekla Structures stores all files associated with a model in a folder it creates with the same name as the model database (.db1).

In multi-user mode all users access the same model folder.

files. If you need to deliver the model to another party, send the full model with all files (not just the model databasedatabase file that contains a model

Model database file has the extension .db1. In addition, other files, such as the corresponding numbering database .db2, are needed in order to obtain the functionality of the model database.

file *.db1 ) to ensure that the weld cross sectiongeometrical form of a part sectioned perpendicular to its axis

size remains the same. If the value for this advanced option is changed, then the actual weld cross-section size will change accordingly.

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet