Hello!

Did you know that logged in users can see a lot more content?

Secondary guideline properties

Last updated March 12, 2019 by Tekla User Assistance tekla.documentation@trimble.com

Software version: 
2019

Secondary guideline properties

Secondary guideline properties

Use the property panecontrol element in Tekla Structures user interface in the form of a side pane window

The property pane can be used to show and modify the properties of model objects.

or the contextual toolbarfloating toolbar that contains commands for modifying the most common object properties

The user can customize the contextual toolbar.

The term mini toolbar is used in Tekla Structures until version 21.1.

to view and modify the properties of the rebar set secondary guidelines.

Spacing properties

If you want a secondary guidelinerebar set guideline that can be used in addition to the rebar set primary guideline to modify the geometry, direction, and spacing of reinforcing bars in a rebar set

Rebar set secondary guidelines can be used to create curved reinforcing bars or to define a different spacing at the start and end of the rebar set reinforcing bars, for example.

to have the same spacing properties as the primary guidelinerebar set guideline that is created automatically when a rebar set is created

, select Yes from the Inherit from primary list in the property pane.

If you want to define the secondary guidelinedefinition of the distribution and direction of the reinforcing bars in rebar sets

The spacing of the reinforcing bars is measured along the rebar set guideline. The rebar set guideline can be a line, or a polyline that may have corner chamfers.

spacing properties independently from the primary guideline, select No from the Inherit from primary list, and then modify the following spacing properties as needed:

Option Description
Start offset

The offsets at the start and end of a rebar set.

By default, Tekla Structures calculates the offset values according to the concrete cover settings and bar diameter. Automatic values are shown in square brackets, for example [32.00].

You can define whether an offset value is an Exact value or a Minimum value. If you select Minimum , the actual offset value can be bigger, depending on the spacing properties. In model views, both the actual and minimum values are shown, for example 50.00 (> 32.00), where the minimum value is in parentheses.

End offset
Length

The length of each spacing zone as an absolute value in the current length units ( Absolute ), or as a percentage of the total length of all spacing zones ( Relative ).

Only two of the three properties, Length , Number of spaces , and Spacing , can be set to Absolute or Exact at the same time.

At least one of the spacing properties needs to be flexible and yield to create a practical spacing combination. In model views, the yielding value is shown in red.

Number of spaces

Defines to how many spaces a spacing zone is divided.

You can define a flexible number, which Tekla Structures aims at ( Target ), or a fixed number of spaces ( Exact ).

Spacing

The spacing value of each spacing zone.

You can define a flexible number, which Tekla Structures aims at ( Target ), or a fixed number of spaces ( Exact ).

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet