Hello!

Did you know that logged in users can see a lot more content?

Modify a rebar set using leg faces

Last updated March 12, 2019 by Tekla User Assistance tekla.documentation@trimble.com

Software version: 
2019

Modify a rebar set using leg faces

Modify a rebar set using leg faces

In addition to modifying an entire rebar set, you can make changes to any individual leg faceplane that defines where the reinforcing bar legs are created in a rebar set

Tekla Structures creates rebar set leg faces at the reinforced faces of concrete parts or pour objects, or according to the points picked when creating a rebar set.

.

Show the leg faces

To modify rebar sets by using leg faces, you first need to make the leg faces visible.

  1. Ensure that theDirect modification switch is active.
  2. On the Concrete tab, click Rebar display options > Leg face visibility .
  3. Select a rebar set.

    Tekla Structures shows the leg faces.

  4. Move the mouse pointer over a leg face and click to select it.

    Tekla Structures highlights the leg face in yellow.

Alternatively, you can set the advanced option XS_​​REBARSET_​​SHOW_​​LEGFACES to TRUE.

Modify the leg faces

You can use any of the following methods when you modify rebar set leg faces.

  1. To move a leg face, drag it to a new location.

    The connected leg face planes remain intact.

    If you want the connected leg faces to follow the dragged leg face, hold down Alt when dragging. The size of the dragged leg face remains the same, but the connected leg face planes may change.

    If you want to detach the leg face from the connected leg faces, hold down Shift when dragging.

  2. To move an edge of a leg face, drag the edge to a new location.

    The connected leg faces follow, if possible.

  3. To create a parallel copy of a leg face, hold down Ctrl and drag the leg face.
  4. To create a new, connected leg face, hold down Ctrl and drag an edge of the leg face.

  5. To add a new leg face at a part face or pour objectbuilding object that is formed of one or more cast-in-place concrete parts, or a part of a cast-in-place concrete part

    The cast-in-place concrete parts are merged into one pour object if they have the same material grade and pour phase, and if they touch each other. Pour objects are visible in pour view.

    face, clickAdd leg face on the contextual tab on the ribbon, and then select the part face or pour object face.
  6. To add a new corner point to a leg face, drag a midpoint handle.

  7. To remove a corner point from a leg face, select the point and press Delete.
  8. To modify a corner chamfer of a leg face, select the corner point, and then select the chamfer type and enter the chamfer dimensions on the contextual toolbarfloating toolbar that contains commands for modifying the most common object properties

    The user can customize the contextual toolbar.

    The term mini toolbar is used in Tekla Structures until version 21.1.

    .

  9. To rotate a leg face, select the leg face and clickEnable leg face rotation on the contextual toolbar.

    Tekla Structures shows a wheel symbol.

    Drag the wheel symbol, or start typing the rotation angle. You can enter a positive or negative value in the Enter a Numeric Location dialog box.

  10. To remove a leg face, select it and press Delete.
  11. To define an additional offset between a leg face and the bars, select the leg face and enter a value for Additional offset on the contextual toolbar, for example,.

    A negative value moves the bars outside the concrete.

  12. To flip bars over to the other side of a leg face, select the leg face and clickFlip bar side on the contextual toolbar.

    Note that after flipping, Tekla Structures searches for concrete on the other side of the leg face to create a concrete cover and apply the concrete cover settings. If there is no concrete, the concrete cover thickness will be zero.

  13. To change the order of the bar layers at an individual leg face, select the leg face and adjust the layer order number using the arrow buttonson the contextual toolbar.

    The smaller the layer order number, the closer to the concrete surface the bar layer is. You can use both positive and negative numbers.

    These modifications override the layer order settings of the entire rebar set.

Tip:

You can modify leg face properties also in the property panecontrol element in Tekla Structures user interface in the form of a side pane window

The property pane can be used to show and modify the properties of model objects.

.

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet