Hello!

Did you know that logged in users can see a lot more content?

Create a reinforcement mesh

Last updated March 12, 2019 by Tekla User Assistance tekla.documentation@trimble.com

Software version: 
2019

Create a reinforcement mesh

Create a reinforcement mesh

You can create a reinforcement meshreinforcement that represents a mesh of steel bars in two perpendicular directions

In Tekla Structures, the reinforcement mesh bars in one direction are called main bars and reinforcement mesh bars perpendicular to them are called crossing bars.

that consists of two perpendicular bar groups. Tekla Structures treats meshreinforcement that represents a mesh of steel bars in two perpendicular directions

In Tekla Structures, the reinforcement mesh bars in one direction are called main bars and reinforcement mesh bars perpendicular to them are called crossing bars.

bars as one unit but distinguishes the main and crossing bars.

The reinforcement mesh can be rectangular, polygonal, or bent. You can also create a customized reinforcement mesh.

Note:

You cannot change the mesh type once the mesh has been created.

Create a rectangular reinforcement mesh

  1. On the Concrete tab, hold down Shift and click Rebar > Mesh.

    The Rebar mesh properties open in the property panecontrol element in Tekla Structures user interface in the form of a side pane window

    The property pane can be used to show and modify the properties of model objects.

    .

  2. In the Mesh type list, select Rectangle.
    Note:

    You cannot change the mesh type once the mesh has been created.

  3. Select the part to reinforce.

    Tekla Structures attaches the mesh to this part.

  4. Pick the start point of the mesh.
  5. Pick a point to indicate the direction of the longitudinal bars.
  6. Click the middle mouse button to finish picking.

    Tekla Structures creates the mesh parallel to the work planeplane that the user has chosen in a model and that is currently active for working on in a model view

    Newly created, copied, or moved model objects comply with the work plane. For example, shifting the work plane to follow a sloped plane makes it easier to model sloped structures.

    , to the left of the points you picked.

  7. If you want to modify the reinforcement mesh, do one of the following:
    • Use direct modification. Ensure that theDirect modification switch is active.

    • Double-click the reinforcement to open the Rebar mesh properties and modify the properties.

Create a polygonal reinforcement mesh

  1. On the Concrete tab, hold down Shift and click Rebar > Mesh.

    The Rebar mesh properties open in the property pane.

  2. In the Mesh type list, select Polygon.
    Note:

    You cannot change the mesh type once the mesh has been created.

  3. Select the part to reinforce.

    Tekla Structures attaches the mesh to this part.

  4. Pick the start point of the mesh.
  5. Pick the corner points of the mesh.
  6. Click the middle mouse button to finish picking.
  7. Pick a point to indicate the direction of the longitudinal bars.

    Tekla Structures creates the mesh.

  8. If you want to modify the reinforcement, do one of the following:
    • Use direct modification. Ensure that theDirect modification switch is active.

    • Double-click the reinforcement to open the Rebar mesh properties and modify the properties.

Reinforcement mesh with holes

If you want to reinforce a part that has holes, you need to pick the corner points of holes when you create the reinforcement.

  1. Select the part to reinforce.

  2. Pick the start point of the mesh.

  3. Pick the corner points of the mesh.

  4. Pick the corner points of the holesmall hollow open throughout a part or assembly that is usually used for fastening parts with bolts or other such objects

    Hole is created in the same way as bolts and hole properties are defined in the bolt properties.

    .

    Note that you need to pick the corner points of the hole in the opposite direction than the corner points in the mesh.

  5. Click the middle mouse button to finish the picking.

  6. Pick a point to indicate the direction of the longitudinal bars.

Create a bent reinforcement mesh

  1. On the Concrete tab, hold down Shift and click Rebar > Mesh.

    The Rebar mesh properties open in the property pane.

  2. In the Mesh type list, select Bent.
    Note:

    You cannot change the mesh type once the mesh has been created.

  3. Enter the bending radius.
  4. Select the part to reinforce.

    Tekla Structures attaches the mesh to this part.

  5. Pick points to indicate the bending shape of the crossing bars.

  6. Click the middle mouse button to finish picking.
  7. Pick two points to indicate the length and direction of the longitudinal bars.

    Tekla Structures creates the mesh.

  8. If you want to modify the reinforcement mesh, do one of the following:
    • Use direct modification. Ensure that theDirect modification switch is active.

    • Double-click the reinforcement to open the Rebar mesh properties and modify the properties.

Create a customized reinforcement mesh

You can create a customized reinforcement mesh that consists of two perpendicular bar groups.

  1. On the Concrete tab, hold down Shift and click Rebar > Mesh.

    The Rebar mesh properties open in the property pane.

  2. In the Layout section, select the Custom Mesh option.
  3. Enter a name for the mesh in the Mesh box.

    The default name is Custom Mesh.

  4. Modify the other mesh properties as needed.
  5. Select the part to reinforce.

    Tekla Structures attaches the mesh to this part.

  6. Pick two points to indicate the direction of the longitudinal bars.
  7. If you want to define the mesh plane, pick one more point.
  8. Click the middle mouse button to finish picking.
  9. If needed, you can save customized properties as property files , and load these properties later on when you create new meshes.

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet