Use the Picture tab to control the shape, number and position of the tubes and the position of the electric boxes in the Electric box in wall (84) modeling tool.
Tube direction
Option
Description
Select the tube shape in the up direction.
Select the tube shape in the down direction.
Select the tube direction in relation to the start point (yellow) and end point (magenta) of the wall.
Select the number of tubes in the up direction.
Select the number of tubes in the down direction.
Tubes to concrete / Electric parts to concrete
Select how the tubes and the electric parts are connected to the concrete part.
Option
Description
As subassembly
Add as a subassembly to the concrete part.
By cast unit
Add to the concrete part.
Welds
Weld to the concrete part.
Not
Do not connect to the concrete part.
Tube and electric box positions
Option
Description
Select the position of the up connection in the concrete part.
Select the position of the electric box in the concrete part.
Select the position of the down connection in the concrete part.