Edge and Corner Reinforcement (62): Edge/Diag bars tab

Added March 12, 2019 by Tekla User Assistance tekla.documentation@trimble.com

Software version: 

Edge and Corner Reinforcement (62): Edge/Diag bars tab

Edge and Corner Reinforcement (62): Edge/Diag bars tab

Use the Edge bars and Diag bars tabs to control the edge and diagonal reinforcing barreinforcement that represents a steel bar used to reinforce a concrete structure

The steel bars are usually ribbed and they are used to increase the tensile strength of concrete.

properties, reinforcing bar overlapping, and concrete cover thickness in the Edge and Corner Reinforcement (62) modeling tool.

Reinforcing bar properties




Prefix for the part position number.

Start number

Starting number for the part position number.


Name that is shown in drawings and reports.


Diameter of the reinforcing bar.


Strength of the steel used in reinforcing bars.

Bending radius

Edge bar bending radius.


Use the Class to group reinforcing bars.

For example, you can display reinforcing bars of different classes in different colors.

Reinforcing bar overlap



L1, L2, L3

Reinforcing bar overlapping length.

Number of reinforcing bars

Number of reinforcing bars in the reinforcing bar group.

Create as one group

Select whether the identical edge bars and diagonal bars are created as a group.

The default value is Yes.

Concrete cover thickness



C1, C2, C3, C4

Bottom, top, and side concrete cover thickness for the edge and the diagonal bars.

Minimum bar length



Minimum bar length

Minimum length of the edge bars on the Edge bars tab.

If the bar is shorten than the entered value, the bar is not created.

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet