Hello!

Did you know that logged in users can see a lot more content?

Work with grids

Last updated March 12, 2019 by Tekla User Assistance tekla.documentation@trimble.com

Software version: 
2019

Work with grids

Work with grids

A gridmodeling aid that represents a three-dimensional complex of horizontal and vertical planes

In Tekla Structures, grids are used as an aid in locating objects in a model. The grid is shown on the view plane by dash-and-dot lines. It is also possible to show grids and grid line labels in drawings, and to modify grid properties in the drawings.

It is possible to have more than one grid in a model. For example, a large-scale grid for the entire structure, and smaller grids for some detailed sections.

represents a three-dimensional complex of horizontal and vertical planes. The grid is shown on the view planeplane in a space that defines the view

In Tekla Structures, the grids are projected onto the view plane and the grid lines can be visible on it.

View depth is defined starting from the view plane.

using dash-and-dot lines. You can create both rectangular and radial grids. Use grids as an aid in locating objects in a model. You can make rectangular grids and grid lines act magnetically so that the objects on the grid lines of a rectangular grid follow if you move the grid linesingle line that visualizes a single grid plane on a view plane

.

Grid terminology

(1) Grid origin is the point where the zero points of each coordinate axis intersect

(2) Grid line extensions define how far the grid lines extend in each direction

(3) Grid labels are the names of the grid lines shown in views

Several grids in one model

You can have more than one grid in a model. You can create a large-scale grid for the entire structure, and smaller grids for some detailed sections. Create as many grids as needed, so that you can easily place objects in your model.

Single grid lines

You can create single grid lines and attach them to an existing grid.

Single grid lines have handles. If theSelect grid line selection switch is active and you select a grid line, the handles appear in magenta. If you move the handles to make a skewed grid, you can do this only on the local XY plane of the grid.

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet