Renumber all
|
All parts get a new number. All information on previous numbers is lost.
|
Re-use old numbers
|
Tekla Structures reuses the numbers of parts that have been deleted. These numbers may be used to number new or modified parts.
|
Check for standard parts
|
If a separate standard-part model has been set up, Tekla Structures compares the parts in the current model to those in the standard-part model.
If the part to be numbered is identical to a part in the standard-part model, Tekla Structures uses the same part number as in the standard-part model.
|
Compare to old
|
The part gets the same number as a previously numbered similar part.
|
Take new number
|
The part gets a new number even if a similar numbered part already exists.
|
Keep number if possible
|
Modified parts maintain their previous numbers if possible. Even if a part or assembly becomes identical with another part or assembly, the original position number is maintained.
For example, you might have two different assemblies, B/1 and B/2, in the model. Later on you modify B/2 so that it becomes identical with B/1. If the Keep number if possible option is used, B/2 will maintain its original position number when you renumber the model.
|
Synchronize with master model (save-numbering-save)
|
Use this setting when working in multi-user mode. Tekla Structures locks the master model and performs a save, numbering, and save sequence, so that all other users can continue working during the operation.
|
Automatic cloning
|
If the main part of a drawing is modified and therefore gets a new assembly position, the existing drawing is automatically assigned to another part of the position.
If the modified part moves to an assembly position that does not have a drawing, the original drawing is automatically cloned to reflect the changes in the modified part.
|
Holes
|
The location, size, and number of holes affects numbering.
|
Part name
|
The part name affects numbering.
|
Beam orientation
|
The orientation of beams affects numbering of assemblies.
|
Column orientation
|
The orientation of columns affects numbering of assemblies.
|
Assembly name
|
The assembly name affects numbering.
|
Assembly phase
|
Only enabled when XS_ENABLE_PHASE_OPTION_IN_NUMBERING is set to TRUE.
The assembly phase affects numbering.
|
Reinforcing bars
|
Reinforcing bars affect numbering.
|
Embedded objects
|
Sub-assemblies affect the numbering of cast units.
|
Surface treatment
|
Surface treatments affect the numbering of assemblies.
|
Welds
|
Welds affect the numbering of assemblies.
|
Tolerance
|
Parts get the same number if their dimensions differ less than the value entered in this box.
|
Assembly position sort order
|
See Number assemblies and cast units.
|