Hello!

Did you know that logged in users can see a lot more content?

Example: Number identical beams

Last updated March 12, 2019 by Tekla User Assistance tekla.documentation@trimble.com

Software version: 
2019

Example: Number identical beams

Example: Number identical beams

This example explains how different numberingprocess of assigning position numbers to parts, cast units, assemblies, or reinforcement

In Tekla Structures, the position numbers assigned in the numbering are shown in marks and templates, for example.

settings result in different part numbers when you modify a part.

To number identical beams:

  1. Create three identical beams with the numbering seriesset of identifiers defined by the user, based on which Tekla Structures compares parts, assemblies, cast units, or reinforcement with each other during the numbering and gives position numbers

    Numbering series is defined by a prefix and a start number.

    The user can, for example, allocate separate numbering series to different phases or part types.

    prefix P and start numberfirst number of a numbering series

    1.
  2. Number the model. All the beams have the part position numberposition number that is assigned to a part

    P1.
  3. Modify one of the beams.
  4. Number the model. You should now have two beams P1 and one P2.
  5. Change beam P2 to be identical to the others.
  6. Number the model.

    Depending on the numbering settings in the Numbering Setup dialog box, Tekla Structures assigns one of the following part positionposition number that is assigned to a part

    numbers to the modified part:

    • Compare to old : P1

    • Keep number if possible : P2

    • Take new number : P3

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet