Hello!

Did you know that logged in users can see a lot more content?

Add automatic marks

Last updated March 12, 2019 by Tekla User Assistance tekla.documentation@trimble.com

Software version: 
2019

Add automatic marks

Add automatic marks

You can set up automatic marks for building objects (parts, neighbor parts, bolts, surface treatmentbuilding object that represents finishing of a part

The term surface treatment is used in concrete detailing. For concrete parts surface treatment includes surface mixes, tiles, and flat finishes, such as troweling and sandblasting.

The term surface finish is used in steel detailing. For steel parts surface finishes include fire-proofing and unpainted areas.

, connections, reinforcement, and neighbor reinforcement) and save the mark properties in a property filefile that contains properties or settings in the property pane or a dialog box

Property files are saved in the current model folder. The user can copy property files to the project or firm folders for future use.

User-defined attributes can be stored as a property file.

for later use.

You can do this the view properties dialog box of single-part, assembly, and cast unit drawings. For general arrangement drawings, automatic marks can be defined on drawing level.

  1. On the Drawings & reports tab, click Drawing properties and select the drawing type.
  2. Load drawing properties that are as close to the ones you need as possible.
  3. Do one of the following depending on the drawing type.
    Drawing type Add automatic marks

    Single-part, assembly and cast unit drawings:

    1. Click View creation in the options tree on the left, select the view and the properties that you want to change, and click View properties.

    2. Click the mark type you want to modify, for example, Part mark.

    3. For some marks, you need to select from a list the object that you are defining the marks for.

      For example, for part marks, you can define part mark settings independently for main and secondary parts, and for sub-assembly main and secondary parts.

    4. Add elements in the mark by double-clicking the elements in the Available elements list.

    5. Modify the element appearance (frame and font).

      For length, height, spacing and diameter elements, you can adjust also the unit and format.

    6. Use the Move up and Move down buttons to place the elements in the order you want.

    7. Modify the appearance, placement and visibility settings on the Content and General tabs.

    8. Save the view properties by entering a properties file name in the box at the top and click Save.
    9. Click Close to return to the drawing properties.

    General arrangement drawings:

    1. Click the mark type you want to modify, for example, Part mark....

    2. For some marks, you need to select from a list the object that you are defining the marks for.

      For example, for part marks, you can define part mark settings independently for main and secondary parts, and for sub-assembly main and secondary parts.

    3. Add elements in the mark by double-clicking the elements in the Available elements list.

    4. Modify the element appearance (frame and font).

      For length, height, spacing and diameter elements, you can adjust also the unit and format.

    5. Use the Move up and Move down buttons to place the elements in the order you want.

    6. Modify the appearance, placement and visibility settings on the Content and General tabs.

    7. Save the mark properties by entering a properties file name in the box at the top and click Save as.

    8. Click OK in the subdialog to save the changes, close the subdialog and return to the drawing properties.

  4. Click Save to save the drawing properties, then click OK and create the drawing.

Example

This is an example of a part markmark that includes a set of selected property elements related to a part

Part marks are made use of, for example, when identifying constructions, when giving information about welding, when giving information about assemblies to a workshop, when giving information about how parts should be connected to each other, and when creating bills of quantities.

In the US, the term piece mark is used to refer to position number.

.

  1. Assembly positionposition number that is assigned to an assembly or a cast unit

  2. Size
  3. Mark frame
  4. Profile
  5. Mark element frame
  6. Length

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet