Did you know that logged in users can see a lot more content?

Modify pour objects, pour marks and pour breaks in a drawing

Last updated March 12, 2019 by Tekla User Assistance tekla.documentation@trimble.com

Software version: 

Modify pour objects, pour marks and pour breaks in a drawing

Modify pour objects, pour marks and pour breaks in a drawing

After you have created a pour drawing, you can open it and modify the pour objects, pour marks and pour breaks.

  1. Open a pour drawing and double-click the drawing background to go to the drawing properties.
  2. If you want so show the pours in the drawing, click the View button, check that Show pours in drawing is set to Yes , and click OK.
  3. Click the Pour object... button to modify the properties:
    • Content tab: Select whether you want to see the hidden lines and own hidden lines, and the edge chamfers by selecting On or Off.
    • Appearance tab: Set the color and type for visible lines and hidden lines.
    • Fill tab: Select the fill for the pour objectbuilding object that is formed of one or more cast-in-place concrete parts, or a part of a cast-in-place concrete part

      The cast-in-place concrete parts are merged into one pour object if they have the same material grade and pour phase, and if they touch each other. Pour objects are visible in pour view.

      face and/or pour object section face.
  4. Click OK.
  5. Click the Pour object mark... button, select the contents and appearance of the mark, and click .
  6. Click the Pour breaks... button and check that Visibility is set to Visible and click OK.

    You can also select whether you want to show pour breakbuilding object used to split a pour object into smaller pour objects

    hidden lines on the Content tab. On the Appearance tab you can change the color and type of the visible and hidden lines in pour breaks.

  7. Modify the other properties as required. For example, click Reinforcement... and set the Visibility of all reinforcing bars to Visible to show the reinforcement in the pour drawing.
  8. Click Modify to apply the changes in your pour drawing.

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet