Automatic grouping of rebar sets for drawings

Last updated March 12, 2019 by Tekla User Assistance

Software version: 

Automatic grouping of rebar sets for drawings

Automatic grouping of rebar sets for drawings

The rebars created by using the rebar set commands are automatically grouped for drawing marking and dimensioning purposes. The automatic grouping works both for simple, non-tapered groups as well as for tapered groups.

Preconditions for rebar group creation

Simple, non-tapered groups are created when:

  • Rebars are created by the same rebar set
  • Rebars are side by side, placed radially, or parallel and distributed along a curve
  • Rebars have identical properties, including length
  • Rebars have the same position numberidentifier that is assigned to all similar parts, assemblies, cast units, or reinforcement

    Position number consists of a prefix, separator, and running number. The prefix is part of the position number, identifying a numbering series. The running number is part of the position number, and is the assigned number in the numbering series, based on the start number. The separator is an optional character, such as a slash, that separates the prefix and the running number.

    In Tekla Structures, the position numbers assigned in the numbering are shown in marks and templates, for example.

    In the US, the term piece mark or ship mark is used to refer to a position number.

Tapered rebars are grouped when:

  • Rebars are created by the same rebar set
  • Rebars are side by side
  • Rebars have identical properties, except length
  • Length of bars increases linearly
  • There are minimum of 3 bars in a group

Spacing of bars is taken into account in grouping if the advanced option XS_​REBARSET_​ENABLE_​BAR_​GROUPING_​WHEN_​SPACING_​DIFFERS is set to FALSE. Then only bars with same spacing are grouped, and each spacing zone of a rebar set automatically creates a separate group. If the advanced option is set to TRUE , spacing is ignored, and groups can contain bars from more than one adjacent spacing zones.

Work with rebar set groups in drawings

Automatically created groups behave in the drawing similarly as the old rebar groups:

Below is an example of an automatically created rebar group in a drawing. The drawing uses rebar group visibility option bar in the middle of group , and reinforcement markmark that includes a set of selected property elements related to a reinforcement

option One leader line to group , and the dimensions have been created with the command Create dimension line.

For more information about creating rebar sets, see Create a rebar set.

For more information about showing automatic bar groups in rebar sets in the model, see XS_​REBARSET_​COLOR_​BARGROUPS.

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet