Hello!

Did you know that logged in users can see a lot more content?

Concrete foundation (1030): Picture tab

Last updated March 12, 2019 by Tekla User Assistance tekla.documentation@trimble.com

Software version: 
2019

Concrete foundation (1030): Picture tab

Concrete foundation (1030): Picture tab

Use the Picture tab to control the dimensions of the reinforcing bars and injection tubes in Concrete foundation (1030).

Dimensions

 

Description

Default

1

Length of the injection tube extension from the top of reinforcing bar.

180 mm

2

Reinforcing bar height in the column.

400 mm

3

4

Reinforcing bar top and bottom cover thickness.

The bottom cover thickness is used only if you do not define the top cover thickness.

0,5 * foundation plate thickness

5

Pile thickness.

The pile thickness value on the Parts tab overrides this value.

300 mm

6

Distance from the bottom of the foundation plate to the bottom of the pile.

5000 mm

7

Pile depth in the foundation plate.

50 mm

8

Foundation plate thickness.

800 mm

9

Distance between the column and the foundation plate.

0 mm

10

Vertical offset from the picked point.

0 mm

11

Reinforcing bar height.

800 mm 400 mm + 50% of height of concrete footing

12

Injection tube elevation 1.

500 mm

13

Injection tube elevations 2 and 3.

Vertical offset for the injection tubes if the tubes are pointing to the same direction.

Define the level to use on the Inj. Tube and rebar tab.

 

Injection tube

Select the shape and dimensions of the injection tubes.

Option

Description

Injection tube in one piece, 90 degree angle.

Injection tube in one piece.

Use value a to define the slope of the tube.

Injection tube and a 90 degree injection hose.

Injection tube and a sloped injection hose.

Use value a to define the slope of the hose.

Straight injection tube. No injection tube opening is created.

 

Description

Default

1

Define the height of a sloped injection tube or hose angle.

30 mm

2

Define the height of a curved injection hose.

0 mm

Reinforcing bar hook length

Define the reinforcing barreinforcement that represents a steel bar used to reinforce a concrete structure

The steel bars are usually ribbed and they are used to increase the tensile strength of concrete.

hook length. You can define also the end angle of the reinforcing bar.

The default value is 10 * reinforcing bar diameter.

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet