Concrete foundation (1030): Inj. tube and rebar tab
Concrete foundation (1030): Inj. tube and rebar tab
Tekla Structures
2019
Tekla Structures
Concrete foundation (1030): Inj. tube and rebar tab
Use the Inj. tube and rebar tab to control the creation, number and position of the reinforcing bars and injection tubes in Concrete foundation (1030).
Option
Description
Create
Select which parts are created.
Injection tubes bend radius
Radius of the injection tubes.
Injection tube properties
Description
1
Select the direction of the bent bars.
2
Select the direction of the injection hoses.
3
Number of injection tubes.
4
Center-to-center distance between the injection tubes.
5
Define the level of the curved injection parts.
This is useful if the curved parts are pointing to the same direction.
You can define the levels on the Picture tab.
Example:
6
Define the distance from the center of the injection tube to the outer contour of the concrete foundation.