Hello!

Did you know that logged in users can see a lot more content?

Sandwich Wall Vertical Seam: Rabbets tab

Last updated March 12, 2019 by Tekla User Assistance tekla.documentation@trimble.com

Software version: 
2019

Sandwich Wall Vertical Seam: Rabbets tab

Sandwich Wall Vertical Seam: Rabbets tab

Use the Rabbets tab to define rabbets in inner shells, insulation layers and outer shells in Sandwich Wall Vertical Seam.

Rabbet side

Select to which side of the sandwich wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

the rabbets are applied.

  • Right side

    Rabbets are equal on both sides, but the rabbet dimensions on the right side are applied to both sides.

  • Left side

    Rabbets are equal on both sides, but the rabbet dimensions on the left side are applied to both sides.

  • Both sides

    Rabbet dimensions can be defined separately for both sides.

  • Both sides mirrored

    Rabbet dimensions can be defined separately for both sides, but sides are mirrored.

Rabbet position

Typically the vertical seams go from the top to the bottom of the sandwich wall. Define the seam offsets for the top and bottom sides. Offsets are applied only to the inner and outer shells.

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet