Seam position

Seams can be defined for inner shells, insulation and outer shells. Draft angles can be defined for the outer shells.

Define the seam position between the sandwich wall shells. The middle line between the walls is used as a reference when the seam position is calculated.

Example:

Shell classes

Define the part classes to be applied to the seams. By default, the Sandwich Wall Vertical Seam component creates inner shells with class 1, foil with class 2, insulation with class 3 and outer shells with class 4. Use these classes to apply seams.

For example, to prevent the creation of seams between foils, insulation shells and outer shells, leave the Insulation classes box empty.

Asymmetrical seams

You can create asymmetrical seams and/or rabbets in the insulation layer.

Offset / Mirror

You can define offset for the seam.