Hello!

Did you know that logged in users can see a lot more content?

Tekla Model Sharing and multi-user for administrators

Last updated September 10, 2018 by Tekla User Assistance tekla.documentation@trimble.com

Software version: 
2018i

Tekla Model Sharing and multi-user for administrators

Tekla Model Sharing and multi-user for administrators

Tekla Model Sharing

Tekla Model Sharingcloud service for collaboration and for storing and sharing a model

Tekla Model Sharing is one of the Tekla online services.

enables efficient global collaborative modeling within a shared Tekla Structures model. Tekla Model Sharing gives users the freedom to work with the same model at the same time in different locations and time zones.

In Tekla Model Sharing each user has a local version of the model on their computer, or on a network drive, and the model data is shared and synchronized over the Internet using a Microsoft Azure cloud sharing service. When a model is shared, it is connected to the cloud-based sharing service. You can check the status of the service at any time.

When a user starts to share a model, the organization the user belongs to gets the model ownership. In Tekla Model Sharing , an organization always owns all the models shared by the users in the organization. A shared modelmodel used for collaboration over the Tekla Model Sharing service

With a shared model, each user works with their own model and the changes are shared through Tekla Model Sharing. A shared model requires the use of a single-user model. The same model cannot be a shared model and a multi-user model.

is always owned by only one organization. You can manage and view all the shared models owned by your organization with the web-based Management Console for Tekla Model Sharing. Logging in requires Trimble Identityuser account to Tekla online services and other Trimble services

For a Tekla Structures user, Trimble Identity is a single sign-on account which enables the user’s online identity management. The organization that the user’s Trimble Identity belongs to, determines the user’s access rights. Trimble Identity is needed, for example, for Tekla Campus and Tekla Warehouse, and to log in to Tekla User Assistance.

administrator rights.

Tekla Model Sharing requires a valid Tekla Model Sharing license and a Trimble Identity which is part of a valid organization. Based on the Trimble Identity information, you can assign and manage Tekla Model Sharing licenses in the web-based Tekla Online Admin Tool. For more information, see Managing Trimble Identities and Tekla Model Sharing licenses.

Tekla Model Sharing cloud sharing service status is publicly available at Tekla Model Sharing Status. On this web-site, you can also find information about any service breaks.

For more information on how Tekla Model Sharing works, see

Note:

Tekla Model Sharing requires a single-user modelmodel that is opened in single-user mode

. A model cannot be simultaneously shared and used in the multi-user modemode in which several users can work on the same model using their own working models

. If you want to start using multi-user mode to share your model instead of Tekla Model Sharing , you first need to exclude your local version of the model from the sharing service and then convert it to a multi-user modelmodel that is used for collaboration and that is opened in multi-user mode

.

The excluded model has no connection to the original shared model in the sharing service. This means that if you exclude your local version of the model from the sharing service and start to use the model in multi-user mode, you cannot later merge the original shared model and the multi-user model.

Multi-user models

You can work on Tekla Structures models in either single-user or multi-user mode. Multi-user mode allows several users to access the same model at the same time. Several users can work on the same project and be aware of the others' progress, so that copying and merging models is not needed.

The multi-user model consists of a single master modelmulti-user model from and to which information is fetched and saved in multi-user mode, and into which Tekla Structures merges changes that individual users make in the working models

It is not possible to work on the master model.

that can be located anywhere in the network. Each user can access this model, and open their own local view of the model on a client computer. This local view is called a working modelmulti-user model that an individual user works on in multi-user mode

Working model is a local copy of a master model and the user’s current model.

. Any changes that a user makes to the working model are local, and not visible to other users, until the working model is saved to the master model.

The multi-user model is locked during opening, saving, and numberingprocess of assigning position numbers to parts, cast units, assemblies, or reinforcement

In Tekla Structures, the position numbers assigned in the numbering are shown in marks and templates, for example.

. When one of the users performs any of these operations, other users cannot perform them during that time. For more information, see How multi-user works.

Note:

All users of the multi-user model should use the same settings and the same version and service pack of Tekla Structures.

Tekla Structures multi-user server runs as a service that is started automatically when you start the computer. You do not need to log in to the service. We recommend that you use the latest multi-user server version available regardless of the Tekla Structures version that you use.

Setting access rights to a multi-user model

You can protect user-defined attributes using privileges. You can also prevent your model and drawings from being accidentally modified by using the Locked user-defined attributeobject property created by the user in order to widen the range of predefined object properties

User-defined attributes are used when the predefined object properties are not sufficient but more properties are needed. For example, comment, locked, and erection status are user-defined attributes.

(UDAobject property created by the user in order to widen the range of predefined object properties

User-defined attributes are used when the predefined object properties are not sufficient but more properties are needed. For example, comment, locked, and erection status are user-defined attributes.

). You can use the UDA for parts (separately for beams, columns, and so on), bolts, welds, specific drawing types, project properties, and phase properties.

Using the Locked UDA and privileges together you can even restrict some users or organizations from modifying your model. For more information on access rights, see Access rights in multi-user mode.

The Locked UDA has three values: Yes , No , and Organization. When set to Yes , the object is locked and you cannot modify its properties. You can only change the object's user-defined attributes that do not affect numbering. If you try to modify a locked object, Tekla Structures displays the following warning message:

There are locked objects, see report. The operation could not be performed.

To add the lockto prevent unwanted action in a model or a drawing

It is possible to lock model objects, reference models, and drawings, for example.

attribute to the user interface, you need to add the following line in the object's section in the objects.inp file:

 attribute("OBJECT_LOCKED", attribute("OBJECT_LOCKED",
"Locked:", option,"%s", none, none, "0.0", "0.0")
{
value("No", 1)
value("Yes", 0) 
value("Organization", 0)
}  
			 

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our documentation.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet