Hello!

Did you know that logged in users can see a lot more content?

Phase Manager

Last updated September 10, 2018 by Tekla User Assistance tekla.documentation@trimble.com

Software version: 
2018i

Phase Manager

Phase Manager

Use Phase Manager to break a model up into sections.

Phases are often used to indicate erection sequences. You can create reports and views, hide and lockto prevent unwanted action in a model or a drawing

It is possible to lock model objects, reference models, and drawings, for example.

objects, and copy objects from other models , according to their phase numbernumeric value that indicates a phase

For example, it is possible to create reports, to filter and lock model objects, and to copy model objects from other models, according to their phase number.

New model objects are given the current phase number.

.

For example, you might have a large project which several users work on simultaneously in single-user modemode in which only one user can work on a model

. First create a basic model that includes, for example, the columns. This is phase 1. You then copy this basic model to all users.

Each user then works on a separate part of the building. When a part of the model is completed, you can copy it back to the basic model as a separate phase (phase 2, 3, etc.).

Note:

When you copy objects between models using phases, the target model must have been created using the same or a newer version of Tekla Structures as the source model. You cannot copy from a newer version to an older version.

Divide the model into phases

  1. On the Manage tab, click Phases.

    The Phase Manager dialog box appears.

  2. Click Add to create new phases.
  3. Click Set current to make the selected phase the current phase.

    From now on, Tekla Structures assigns all objects you create to the current phase. The @ character in front of the phase number indicates the current phase.

  4. Divide the model into phases.
    1. To identify the phase of an object, select an object and click Phases by objects.

      Tekla Structures selects the phase of the object.

    2. To see which objects belong to a certain phase, select a phase from the list and then click Objects by phases.

      Tekla Structures highlights the corresponding objects in the model.

    3. To change the phase of one or more objects, select the objects, select a phase from the list, and then click Modify phase.
  5. Click OK to save your changes.

Lock and unlock objects in specific phases

To protect model objects from being accidentally modified or deleted, you can lock them. For example, you can lock parts, bolts, welds, and reference models in a Tekla Structures model according to their phase.

When an object is locked, you cannot modify its properties or delete it. You can only change the object’s user-defined attributes that do not affect numberingprocess of assigning position numbers to parts, cast units, assemblies, or reinforcement

In Tekla Structures, the position numbers assigned in the numbering are shown in marks and templates, for example.

. If you try to modify or delete a locked object, Tekla Structures displays the following warning message:

"There are locked objects, see report. The operation could not be performed."

  1. On the Manage tab, click Phases.
  2. In the Phase Manager dialog box, select the phases whose objects you want to lock or unlock.
  3. Do one of the following:

    • To lock objects, click Lock objects.

      Tekla Structures sets the user-defined attributeobject property created by the user in order to widen the range of predefined object properties

      User-defined attributes are used when the predefined object properties are not sufficient but more properties are needed. For example, comment, locked, and erection status are user-defined attributes.

      Locked to Yes for the objects in the selected phases.

    • To unlock objects, click Unlock objects.

      Tekla Structures sets the user-defined attribute Locked to No for the objects in the selected phases.

For information on how to protect model objects from being accidentally modified in the multi-user modemode in which several users can work on the same model using their own working models

, see Access rights in multi-user mode.

Define custom phase properties

You can add custom phase properties, which will appear as extra columns in the Phase Manager dialog box.

Define the names of phase properties in the objects.inp file. To use phase properties in reports and templates, use the syntax PHASE.ATTRIBUTE_NAME in the phase property field name.

The default objects.inp file contains a Phase attributes section with syntax examples. For more information, see Properties of the objects.inp file.

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our documentation.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet