Did you know that logged in users can see a lot more content?

Copy and move objects

Last updated September 10, 2018 by Tekla User Assistance tekla.documentation@trimble.com

Software version: 

Copy and move objects

Copy and move objects

The basic functionality of copying and moving objects is the same in models and drawings. You can copy and move objects linearly, with rotation, and with mirroring.

Duplicate objects

Two objects are considered duplicates if they have the same properties and location. Tekla Structures checks for duplicate objects when you copy and move objects or create new objects in the same location as an existing object. If duplicates are found, you can choose whether to keep or delete them.

Use the advanced option XS_​DUPLICATE_​CHECK_​LIMIT_​FOR_​COPY_​AND_​MOVE to define the maximum number of objects that can be counted as duplicates while copying or moving objects.


Tekla Structures does not check for duplicates when you copy objects using a modeling tool, such as the Array of objects (29) component.

Connected objects

When you copy objects that are connected to another part (such as connections and bolts), Tekla Structures tries to find suitable new main parts for these copied objects. If none are found, some of the connected objects may not be copied at all. After copying, check that all of the objects have been copied correctly.

Assemblies and cast units

If you copy or move objects from an assembly or cast unit, Tekla Structures copies the assembly structure if possible. For example, sub-assemblies are copied as sub-assemblies if a parent object is found.

Reinforcement and surface treatment

If you copy or move reinforcement or surface treatments, and want them to adapt to the part they are copied or moved to:

  • The reinforcement handle or surface treatmentbuilding object that represents finishing of a part

    The term surface treatment is used in concrete detailing. For concrete parts surface treatment includes surface mixes, tiles, and flat finishes, such as troweling and sandblasting.

    The term surface finish is used in steel detailing. For steel parts surface finishes include fire-proofing and unpainted areas.

    handles must be in part corners.

  • The parts between which you copy or move must have the same number of cross sectiongeometrical form of a part sectioned perpendicular to its axis


  • Circular parts must have the same cross section dimensions.

Drawing objects

You can copy and move drawing objects between drawing views that have different scales.

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet