TABLE OF CONTENT
/* Section 1 - Système */ ..\nt\TplEdtool in Tekla Structures that is used for creating and modifying templates to be used in drawings and reports
\.. > ..\nt\bin\TplEd\..
/* Section 4 - View Management - Vues */
/* Section 6 - Drawing Properties - Propriétés dessins */
/* Section 9 - Numberingprocess of assigning position numbers to parts, cast units, assemblies, or reinforcement
In Tekla Structures, the position numbers assigned in the numbering are shown in marks and templates, for example.
- Repèrage */
/* Section 20 - Import & Export */
/* Section 8 - Marking - Repères */
set XS_ATTRIBUTE_FILE_EXCLUDE_LIST=A_liste_;B -----;B_commande_;B_liste_;B_end_;B_reperes_;C -----;C_cdg;C_liste_;D_liste_;E -----;E_liste_;F_liste_dessinsA;F_liste_dessinsW;G -----;G_liste_;A -----;B_Commande_;B_feuille_de_coupe;D -----;E_pieces_;E_trous_;TS_Report_Inquire;A_Assembly_;B_Bolt;B_Studbolt element that represents a metal rod or pin that is used to transfer loads
Studs and other bolt elements are listed in the bolt catalog.
A stud can be secured with two or more nuts and have threading at both ends, or it can be welded to steel parts, for example.
A stud is part of the bolt assembly.
/* --- Modélisation ----------------------------------------------------------------------------------------*/
/*Mettez cette variable à TRUE pour permettre le ferraillage des pièces vérrouillées*/
rem set XS_ALLOW_REINFORCING_LOCKED_PARTS=TRUE
CustomInquiry: contain all .it files moved from .\macros\modeling\InquiryToolAttributes
PropertyRepository: customized property panecontrol element in Tekla Structures user interface in the form of a side pane window
The property pane can be used to show and modify the properties of model objects.
for cast-unit and rebar.
InquiryToolAttributes under .\france\macros\modeling
Provider profiles are now available in the Tekla Warehouseservice for collaboration and for storing and sharing Tekla Structures content
In Tekla Warehouse the content items are stored in collections. Tekla Warehouse includes the Tekla Warehouse Service and the Tekla Warehouse web site.
Tekla Warehouse is one of the Tekla online services.
and can be downloaded if needed.
New profiles HD:
New profiles KALZIP W:
New profiles ARVAL ARGUIN:
New profiles ARCELOR ARVAL ETNIC:
New profiles ARCELOR ARVAL CHAOTIC:
New profiles ARCELOR ARVAL CAILLOC:
New profiles ARCELOR ARVAL PULSATION:
New profiles ARCELOR ARVAL VIBRATO:
New profiles ARCELORMITTAL CARAIBES ARMAT:
New profiles JORIS JI ROOF PIR:
New profiles ARVAL PROMISTYL
New profiles ISCOM Riverclack & Rivergrip:
Add SPIT FIX 3
Modified all SPIT assemblies with DUMMY nuts and washers
All shape codes was updated according to NF P02-015 / NF EN ISO 3766
Added - Compresser les géométries de forme - in section - Utilitaires et applications
objects_inp_tab.txt in .\Environments\france was updated, new tab Informations Structurelles was added in several udaobject property created by the user in order to widen the range of predefined object properties
User-defined attributes are used when the predefined object properties are not sufficient but more properties are needed. For example, comment, locked, and erection status are user-defined attributes.
new attribute("REPERE_FER", "Repère imposé", string, "%s", no, none, "0.0", "0.0", 1)
new attribute("USINE", "Usine", string, "%s", no, none, "0.0", "0.0",4)
new attribute("STABILITE_FEU", "Stabilité au feu", string, "%s", no, none, "0.0", "0.0",5)
pour_unit(0,"j_Pour_unit") added with
In concrete_spiral_beam(0,"j_concrete_spiral_beam") the tab_page("EN206-1","EN 206-1",89) was replaced by tab_page("design","Conception générale",70)
In part(0,"Part") , tab_page("CIS_Parameters","CIS2",11) and tab_page("France","France",12) were added
Information complémentaires pièces works with folded parts
Macros are located in the applications and components catalog. They are recorded or created manually and stored as .cs file in a folder defined with the advanced option XS_MACRO_DIRECTORY.
Macros can, for example, be used for creating drawings or reports.
Macros are sometimes used to run an application.
: Symbole d'ouverture, Symbole de réservation, Symbole de réservation circulaire, symbole réservation circulaire complet
all these macros were replaced by Square & Circular opening symbols available on Tekla Warehouse
T_liste de coulages.pdf.rpt
Q_liste inserts béton.tpl
liste_Ferraillage.tpl (manage Brace girder)
Displays variable thicknesses as well as precast slabplate that represents a concrete structure
In Tekla Structures, a slab is created by picking three or more points.
Slab may be part of a floor, for example.
+ compression slab thicknesses.
Example with a balcony and a floor layout:
The precast slab must be added to the compression slab to form a concrete element. Here is the result in the drawings:
New template "Unité de Coulage"
Modified template "Escalier -95-"
Other modified templates : "Armatures" and "Coulé sur site"
New standard fileproperty file that Tekla Structures uses by default
Standard files are used, for example, for loading frequently used values into the property pane or a dialog box.
Standard file name is standard.* where the symbol * is the file name extension. For example, standard.clm file is used for column properties.
for Wallplate that represents a structure such as a wall or roof panel
In Tekla Structures, a panel is created by picking two or more points.
In cast-in-place concrete the term wall refers to a concept similar to panel.
Layout "MCI" setting
New category for Pour Units
To obtain the following plans for straight railing
And for slope railings:
Modified the rules of assembly drawings into Tekla_Croquis_Auto:
Created a new filter AcierGarde-corpsRampant:
New AD configuration ts_Garde-Corps_Rampant created
View configuration ts_Garde-Corps_Rampant_Vue created:
ts_Garde-corps.ad was modified:
with these properties in ts_Garde-corps_section
Dimensioning config ts_Garde-corps:
- The Master Drawings Catalogue contains a tree structure by type of concrete element with formwork, reinforcement and rules configurations for each:
Note: activate the description to get the necessary information.
- The name of all concrete element and view drawing configurations starts with "ts_" as in the steel role. Moreover, some views are configured but not active by default to not overload the drawing (ex: 3D Viewview that displays objects three-dimensionally
3D view is one of the default views.
), just display them if necessary :
- For the assistants, the name starts with "Tekla_" as in the steel role :
- All dimensions are in cm by default and views are named :
- There is no longer any distinction between Precast and Cast in Place. If there are embeds, the dimensioning is automatic and the list of embeds appears at the bottom left corner:
- For slab reinforcement drawings, 3 views are created: top, bottom and additional reinforcement:
- The filter is done on the reinforcement names (contains "INF" or "SUP") as well as on the following user attributes :
- New configuration for the precast slabs, on the same principle as the Wall Layout:
- Configurations available for junctions (with neighbor parts) :
- GA settings simplification :
The floor reinforcement plans work in the same way as for the slabs (distinction between SUP sheet, INF sheet and additional reinforcement).
- New pileslender column or pole that is put into the ground to carry loads or to provide support
Pile may be made of precast or cast-in-place concrete, or steel.
layout configuration :
- Obsolate concrete cloning templates
- Some layouts are useless or obsolete. He now remains:
- All old precast concrete drawing configurations.
- Some configurations of dimensions, marks, etc....
The new "Plan de coulage" setting display each pour phasepart property that defines which cast-in-place concrete parts form a pour object
Pour phase can be used to prevent cast-in-place concrete parts from merging into one pour object.
in a specific color and add an automatic markmark that Tekla Structures creates in a drawing based on the mark properties of a building object
for each pour objectbuilding object that is formed of one or more cast-in-place concrete parts, or a part of a cast-in-place concrete part
The cast-in-place concrete parts are merged into one pour object if they have the same material grade and pour phase, and if they touch each other. Pour objects are visible in pour view.
. With this setting, it is also possible to use new objects level settings :
*.dim, *.gd, *.ad, *.md, *.wd, *.cud, *.gdd, *.add, *.mdd, *.mdd, *.wdd, *.cudd.
We recommend you do the same if you have these settings in your FIRM.
New opening graphic symbols for round and square shapes
New opening component with rolling shutter box and window sill
Select the slab of the current level, the slab of the lower level then 2 points to create the beam. It fits underneath the main slab (total height or drop-beam adjustment).
Drop-beam and height below beam are automatically entered into the beam user attributes.
New version of the custom componentcomponent that the user creates and uses for creating model objects whose composition the user can modify as a group
that attaches a rail to a column. Angle, plate(1) part that represents a flat structure
(1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.
(2) plate that represents a steel structure
(2) Plate is mainly used as a connection piece or as a floor plate.
, folded plate, 45°cut or large holesmall hollow open throughout a part or assembly that is usually used for fastening parts with bolts or other such objects
Hole is created in the same way as bolts and hole properties are defined in the bolt properties.
take care of rail slope and manage longholes in support part
New version 1.3 fix and new functionnality to create key holes on the opposite tube face. Select the bolt groupgroup of bolts that forms a connecting building object between an assembly main part and secondary parts
The number of bolts in a bolt group depends on the bolt group shape and the values of bolt distances.
, define the hole diameter and click the button.
New plugincomponent that is developed using Tekla Open API
Plugin is a .dll file and loaded inside Tekla Structures process.
Plugins can be started from the applications and components catalog.
allowing to create flat, rectangular or panel end reinforcement.
Select one side of the concrete object to create the reinforcement. The latter is thus linked to the face and will follow in the event of dynamic modification.
New drawing plugin allowing to create an automatic dimensiondimension that Tekla Structures creates in a drawing based on the dimensioning properties of the drawing
of all the parts crossed by a line. A selection filterfilter used for defining which object types can be selected
Selection filter chooses model objects according to object properties.
Selection filters can be standard or user-defined.
For example, selection filters can be used to select parts for drawings or analysis.
can be applied to dimension only certain objects.
New plugin for creating openings in double-wall. It only works on "Wall Layout". It allows the creation of cuts from any profile of the cataloguser interface for displaying or modifying information in categorized lists
For example, profile catalog and shape catalog are catalogs.
, defining the different wall layers to cut. In addition, the tool allows the creation of formwork parts inside the cutouts, thus optimizing Unitechnik exports.