Hello!

Did you know that logged in users can see a lot more content?

2018 Table of Contents

Add section marks in drawings

Last updated March 16, 2018 by Tekla User Assistance tekla.documentation@trimble.com

Software version: 
2018

Add section marks in drawings

Add section marks in drawings

You can add section marks in an open drawing.

  1. Open a drawing.
  2. On the Drawing tab, hold down Shift and click Section mark.
  3. In the Section Mark Properties dialog box, set the cutting linestraight line that is defined by picking two points and used for shaping the part or a rebar set

    properties and select a color for the line.
  4. On the Section mark tab, set the contents and the appearance of the section markuser-created symbol that includes a set of mark elements, identifies a section, and is displayed in the source view

    .
  5. Click OK or Apply.
  6. Pick the first and the second point on the cut planeplane whose position is defined by a cut surface

    .

    Create as many section marks as you need.

  7. Press Esc to interrupt.

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet