Hello!

Did you know that logged in users can see a lot more content?

Kingspan Extended Boundary Wall Eaves Beam Strut (17) - Parameters tab


Software version: 2017i

Last updated August 27, 2019 by Trimble Solutions UK tekla.support.uk@trimble.com

Software version: 
2017i
Environment: 
Not environment-specific

Kingspan Extended Boundary Wall Eaves Beam Strut (17) - Parameters tab

Use the Parameters tab in the Kingspan Extended Boundary Wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

Eaves Beam Strut Properties panel to control how the connecting members are defined within Tekla Structures.

Tekla Structures properties Parameters tab for Kingspan Extended Boundary Wall Eaves Beam Strut (17)

Option Description Default Other
Grade This is the material grade that will be used for all the parts in this macro. The default setting is S390.  
Part Pos Prefix This specifies the prefix for the Part Pos Num that will be used for the ties. The default setting is MB.  
Part Pos Start Number This specifies the start number for the Part Pos Num that will be used for the ties. The default setting is 1.  
Assembly Prefix This specifies the prefix for the Assembly Pos Num that will be used for the ties. The default setting is CR.  
Assembly Start Number This specifies the start number for the Assembly Pos Num that will be used for the ties The default setting is 1.  
Group This sets the class that all parts will be included in. The default setting is 99.  
Purlin Cleat Rotation
(Left, Right)
This controls the direction of the cleat attached to the purlin. If this is set to Left then looking to the eaves beam from the purlin, the cleat will be orientated so that it faces to the left. The Right option similarly causes the cleat to face to the right. The default is set to Left.
Purlin cleat rotation to the left for Cold Rolled steel systems
Right

Purlin cleat rotation to the right for Cold Rolled steel systems
Left
NBW1 Finish
(Galvanised, Unpainted)
This specifies the finish of the cleat. The default is set to Galvanised.  
NBW2 Finish
(Galvanised, Unpainted)
This specifies the finish of the cleat. The default is set to Galvanised.  

See also

Kingspan cold rolled - Important information
Kingspan Extended Boundary Wall Eaves Beam Strut (17)

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet