Use the Parameters tab in the Kingspan Eaves Beam to Stanchion Properties panel to control how the connecting members are defined within Tekla Structures.
|Eaves Cleat is (Welded, Bolted)||This specifies whether the eaves beam cleat should be welded to the stanchion or bolted. If the bolted option is chosen then a plate will be added to the fixing bracket in order to allow a bolted connection to the stanchion. Otherwise the fixing bracket will be welded directly to the stanchion.||The default is set to Welded.|
|Overhang dim. Gables only||This specifies the overhang dimension for a gable end only. The dimension is measured from the centre of the cleat.||Where a sleeve is defined the purlin will be cut back to the standard manufacturer's end gap and the sleeve/stub will be positioned to the overhang. Otherwise the purlin will be extended to the overhang point.|
|Eaves Bolt Standard||This sets the standard for bolts placed to the bottom flange of the eaves beam.||The default setting is 8.8XOX.|
|Eaves Beam Web Bolt Standard||This sets the standard for bolts placed to the web of the eaves beam.||The default setting is 8.8XOX.|
|Standard, Bolts to Stanchion||This sets the grade for all the bolts going to the stanchion.||The default setting is 8.8XOX.|