Hello!

Did you know that logged in users can see a lot more content?

Rebar Sub ID

Last updated November 16, 2017 by Developer TIN Structures.developer.in@trimble.com

Software version: 
2017i
Environment: 
Not environment-specific

Rebar Sub ID

Rebar Sub ID tools Generate alphabetic sub id series for tapered range rebar groups in reports and drawings.

Rebar Sub ID tools set has 2 Custom Attributes and 1 drawing plug-incomponent that is developed using Tekla Open API

Plug-in is a .dll file and loaded inside Tekla Structures process.

Plug-ins can be started from the applications and components catalog.

.

1. CUSTOM.REBAR_SUB_ID (This can be used in any reports to generate alphabetic sub id series).
2. CUSTOM.REBAR_SUB_ID_DWG (This can be used in drawings to get the alphabetic sub id of the last rebar in tapered group).
3. RebarSubId Tag on Dimension plug-in (This plug-in automatically identify the start and end range of the tapered group and mark alphabetic series on dimension lineline that visualizes the distance between the defined dimension points

Separate dimensions can be combined into a longer dimension line.

start and end).

1) CUSTOM.REBAR_SUB_ID

This is a custom attribute automatically deployed with the installer, and the installer also deploy the sample report file named “RebarSubID.rpt”.

Usage

Select the tapered range group and run the report RebarSubID.

Sample output report

Note: By using this custom attribute (CUSTOM.REBAR_SUB_ID) user can configure their own reports for getting the alphabetic sub Id series. For reference go through RebarSubID.rpt.

2. CUSTOM.REBAR_SUB_ID_DWG

This is a custom attribute automatically deployed with the installer.

Usage

This custom attribute can be called any were in drawings like marks, note etc. to get the last bar alphabetic sub id.

Note: This is very useful for the below plug-in.

3. Rebar Sub ID Tag on Dimension

How to locate
After installation below icon will be available in Applications & components

Usage

Input for this extension

1. Pick tapered reinforcement group. (picked reinforcement should have dimension line)

Alphabetic sub-id associative notes are added at both ends of the dimension line according to the range created in model.

Rebar Sub ID Dialog

Start Margin and End Margin allows to provide gapany space between two objects

The term ’gap’ is used in its general sense in Tekla Structures.

between the associative noteassociative annotation object that can include any additional information about the building object it is attached to

One building object can have several associative notes.

and dimensions line ends.

Associative Note Attribute allows to select the appropriate Associative Note Attribute file.
This control automatically list all the associative note attribute files saved in the current modelmodel that is active in Tekla Structures

The current can be a single-user model, a shared model or a working model.

.
The content of the associative note should be configure properly, the same content will be displayed on the dimension line.

sample configuration and how it reflects on dimension line.

Associative Note configuration

As highlighted in red color, the Content of Associative Note property should be always Rebar.

Configure the Element in marks

Then save the attributes with Tapered Bar Range

Attribute file selection

Now select the Tapered Bar Range from drop down and click on Modify

Output


Quick feedback

Your feedback on the documentation. The feedback you give here is not visible to other users. Please use the "contact us" form instead if you have a query and you wish to receive a reply.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet