Hello!

Did you know that logged in users can see a lot more content?

Tekla Structures 2017i France Environment Release Notes

Last updated September 18, 2017 by Trimble Solutions France tekla.support.fr@trimble.com

Software version: 
2017i
Environment: 
France

Tekla Structures 2017i France Environment Release Notes

TABLE OF CONTENT

1. General Settings

1.1 ini Files for French environment

1.1.1 env_France.ini
1.1.2 role_Acier.ini
1.1.3 role_Béton_Coulé_Sur_Site.ini.ini
1.1.4 role_Béton_Planificateur_de_production.ini
1.1.5 role_role_Béton_Préfabriqué.ini

1.2 Folder structure

1.3 File settings

1.4 Catalogs

1.4.1 Profile catalog
1.4.2 Bolt catalog

1.5 Objects.inp

1.6 Reports

1.7 Tools

1.7.1. Custom Inquiry

2. Drawing settings

2.1 Drawings for steel role

2.1.1 New settings for spiral beam
2.1.2 UDA

2.2. Drawings for concrete role

2.2.1 New settings for spiral beam
2.2.2 Rebars marks standards
2.2.3 Rule sets (Wizard)

3. Modeling settings

3.1 Common

3.2 Concrete Components

1. General Settings

1.1 ini files for French Environment

1.1.1 env_France.ini

set XS_ATTRIBUTE_FILE_EXCLUDE_LIST=……Assembly.it;Bolt.it;Cast Unit.it;IFCRebar.it;Part.it;Pour.it;Rebar.it;Weld.it;

1.1.2 role_Acier.ini

  set XS_ATTRIBUTE_FILE_EXCLUDE_LIST=……Assembly.it;Bolt.it;Cast Unit.it;IFCRebar.it;Part.it;Pour.it;Rebar.it;Weld.it;

1.1.3 role_Béton_Coulé_Sur_Site.ini.ini

  set XS_ATTRIBUTE_FILE_EXCLUDE_LIST=……Assembly.it;Bolt.it;Cast Unit.it;IFCRebar.it;Part.it;Pour.it;Rebar.it;Weld.it;

1.1.4 role_Béton_Planificateur_de_production.ini

  set XS_ATTRIBUTE_FILE_EXCLUDE_LIST=……Assembly.it;Bolt.it;Cast Unit.it;IFCRebar.it;Part.it;Pour.it;Rebar.it;Weld.it;

1.1.5 role_role_Béton_Préfabriqué.ini

  set XS_ATTRIBUTE_FILE_EXCLUDE_LIST=……Assembly.it;Bolt.it;Cast Unit.it;IFCRebar.it;Part.it;Pour.it;Rebar.it;Weld.it;  

1.2 Folder Structure

Custom Inquiry files move from . \france\macros\modeling\InquiryToolAttributes to .\Environments\france\system\CustomInquiry

 

1.3 Files settings

rebar_config.inp : translated + rounded rebars lengths at 5mm
RebarCoupler.Symbols.dat, RebarCoupler.Udas.dat : translated
tableau_coupleurs.tpl : fixed quantity
Rebar Groupgroup of reinforcing bars that are side by side and have identical properties, except the possible variation in bar lengths

Marking and Rebar Group Dimension:  new standards

1.4 Catalogs

1.4.1    Profile Catalog

New parametric profiles CANZ:
  

New profiles MONOPANEL MP B FILEA:
 

New profiles RAICO:
 
 
 

New profiles BACACIER COVISO:
 

New profiles ISOPAN ISOCOP & ISOPARETE PLISSE:
 

1.4.2. Bolt Catalog

Update WURTH bolts

- Added all reference numbers on each anchors
- The replacement of the W-SA anchor screws by the W-BS more efficient and more aesthetic.

- The addition of WIT-PE 500 seismic resin C2 with standard threaded rods.

- The addition of WIT-PM 200 resin enhanced for full and hollow.

- The addition of W-VIZ-IG threaded sleeves associated with WIT-VM 100 resin

 

1.5 Objects.inp

objects_inp_tab.txt .\france updated

New spiral_beam(0,"j_spiral_beam") and concrete_spiral_beam(0,"j_concrete_spiral_beam") added

tab_page("France - Armature")  replacement of the "positions nord, sud,..." by "Face supérieure, inférieure,..."

 

tab_page("DR_TITLE_DESIGNER") added to all role

1.6 Reports

  • New : E_liste vis.pdf.rpt, B_liste plats.pdf.rpt
  • Modified: E_liste vis.xls.rpt, E_liste vis.csv.rpt >title name;  xxxx.pdf.rpt > title1 to title2; E_liste boulonnerie.pdf.rpt > ref prefix removed for “Chevilles”
  • Complete overhaul of concrete and reinforcement lists

1.7 Tools

1.7.1. Custom Inquiry

Quantity and radius have been added for “Pièce” and “Elément Béton

 

IFCfile format commonly used in BIM that facilitates software interoperability

IFC is an open specification developed by the IAI (International Alliance for Interoperability).

Model can be exported into an IFC file.

setting have been updated
 

2. Drawing settings

2.1. Drawings for steel role

2.1.1 New settings for spiral beam

New ts_débillardé.wd created for spiral beambeam that follows the form of a helix and is defined by a start point, center point and the rotation axis

Spiral beams can be concrete spiral beams or steel spiral beams. They can be used to create spiral staircases, complex architectural structures, and concrete parking ramps, for example.

Spiral beam can rise from the work plane or be flat. If the spiral beam rises, the total rise is defined between the start and the end point.


 

2.1.2 UDA

Titre Dessin tap is now available for Workshop, Assembly and GA drawings

2.2. Drawings for concrete role

2.2.1 New settings for spiral beam

New Poutre débillardée.cud created for spiral beam
 
 

2.2.2 Rebars marks standards

Creation of reference mark standards, associative notes,... for reinforcements

2.2.3 Rule sets (Wizard)

  • Assistant dalle béton : Correction of filters concerning the top and bottom layers that were inverted
  • Croquis Massif Béton renamed as Assistant Massif Béton to standardize concrete wizards
  • Assistant panneau béton : Deleting drawing config. “Panneau_ferraillage_2” unnecessary

3. Modeling settings

3.1 Common

New standards ITEM
 
 

3.2 Concrete Components          

New standards #67, #70, #90, #64, Plancher composé (Outil Calepinage), #76, #78

 

 

 

Content rating: 
Average page rating: 5 (1 vote)
Refresh page after voting to show updated result.