Hello!

Did you know that logged in users can see a lot more content?

2017i Table of Contents

Create and modify drawing views

Last updated September 6, 2017 by Tekla User Assistance tekla.documentation@trimble.com

Software version: 
2017i

Create and modify drawing views

Create and modify drawing views

Drawing views contain Tekla Structures model objects, and the marks, dimensions and other objects that you have added. A drawing viewview that includes selected model objects or an area in the model, that is represented in a drawing

A drawing view is a container for model and drawing objects.

A drawing can include several drawing views, which usually are two-dimensional views, plane views, to the model.

Examples of drawing views in Tekla Structures include main views, section views, single-part views, and 3D views.

is another way of looking at the model. Drawings may include several views. In addition to the views Tekla Structures creates automatically based on the drawing properties, you can also add new ones in the open drawing, and modify the existing ones.

You can have different types of views in Tekla Structures drawings:

  • Main views: front, top, back and bottom views

  • Section views

  • End views

  • Single-part views

  • 3D views

  • Detail views

  • Key plansmall-scale view in a drawing that indicates the location of an assembly, a cast unit, or a part in the model

    A key plan contains the model grid and the assembly, cast unit, or part shown in the included drawing view.

    views

  • Views along gridmodeling aid that represents a three-dimensional complex of horizontal and vertical planes

    In Tekla Structures, grids are used as an aid in locating objects in a model. The grid is shown on the view plane by dash-and-dot lines. It is also possible to show grids and grid line labels in drawings, and to modify grid properties in the drawings.

    It is possible to have more than one grid in a model. For example, a large-scale grid for the entire structure, and smaller grids for some detailed sections.

    lines

  • Elevation views

  • Plan views

Copying, linking and moving views

You can move, copy and link views from one drawing to another:

Copy drawing views from other drawings

Link drawing views from other drawings

Move drawing views to another drawing

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet