Hello!

Did you know that logged in users can see a lot more content?

2017i Table of Contents

Add part marks manually in drawings

Last updated September 6, 2017 by Tekla User Assistance tekla.documentation@trimble.com

Software version: 
2017i

Add part marks manually in drawings

Add part marks manually in drawings

In an open drawing, you can add part marks for all building objects, surface treatmentbuilding object that represents finishing of a part

The term surface treatment is used in concrete detailing. For concrete parts surface treatment includes surface mixes, tiles, and flat finishes, such as troweling and sandblasting.

The term surface finish is used in steel detailing. For steel parts surface finishes include fire-proofing and unpainted areas.

and connections, or for the selected ones only. For each view, Tekla Structures creates the marks according to the mark properties in the view mark properties dialog box.

Tip:

Use orthogonalview projection that displays objects in right-angles projection

In model view the size of the objects is the same despite of their distance to the viewing point and the zoom remains on part faces.

snapping in marks and associative notes with leader lines. For example, you can use it for placing your marks and notes in a more consistent way in exact locations. When you start dragging a mark or note from a leader lineline that connects an annotation object to the related object or point

end handle, and you have orthogonal snapping on, the leader line end handle locks to the closes orthogonal point in the drawing (0, 45, 90, 135, 180 degrees). To activate orthogonal snapping, press O.

To add part marks, do one of the following:

To

Do this

Add part marks for all parts

On the Drawing tab, click Part mark > For all parts .

If you have deleted marks manually from the drawing, this command will not create the marks, and you will have to create them manually part by part.

Add part marks for selected parts

  1. Select the parts.

  2. On the Drawing tab, click Part mark > For selected parts .

  3. If the part mark does not contain any elements in the drawing view properties, the Part Mark Properties dialog box is displayed, and you can select the elements to be included in the part mark.

    Add elements and click Modify.

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet