Last updated March 6, 2017 by Tekla User Assistance tekla.documentation@trimble.com

Software version: 



Category : Concrete Detailing

By default, the pour management functionality is active and the cast-in-place concretecast unit type where the concrete is formed, poured, and cured in its final position

structures are shown as continuous only in the Contractor role. In the other roles, this advanced option is set to FALSE.

To enable pour management and show concrete structures as continuous in another role, set this advanced option to TRUE. When the pour functionality is enabled in a model, the commands for showing and creating pour objects and pour breaks in the model and in the drawings will be available.

This advanced option is model specific and the setting is saved in the options databasedatabase file that contains the settings of model-specific general settings and advanced options

There are two options databases, the model options database (options_model.db) and the drawing options database (options_drawings.db).



If the pours are enabled in the model, do not disable the pours using XS_ENABLE_POUR_MANAGEMENT , especially in the middle of the project. This may cause problems if you have drawings containing pours, and if you are sharing your model. The pours and pour breaks in the model and in the drawings may get invalid, and you may lose pour-related modeling work.

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet