2017 Table of Contents

Rebar end anchor: Attributes tab

Added June 1, 2017 by Tekla User Assistance tekla.documentation@trimble.com

Software version: 
2017

Rebar end anchor: Attributes tab

Rebar end anchor: Attributes tab

Use the Attributes tab to define the user-defined attributes (UDAs) in Rebar end anchor.

Option Description
Threaded length

The value is written to the reinforcing bar UDA.

The fields are used for checking which bars have threads and what are the thread values so that they can be shown in drawings and reports.

Extra fabrication length

This value is written to the reinforcing bar UDA.

This value does not affect the length of the reinforcing bar. You need to add this value in your drawings and reports to get the correct length if required.

Method

Type

Product

Code

UDAs written to the reinforcing bars.

You can set the reinforcing bar end method and the coupler type, and add a product name and a code for reporting purposes.

The used attribute name depends on which end of the reinforcing bar the coupler was created to.

Note:

The above user-defined attributes affect numberingprocess of assigning position numbers to parts, cast units, assemblies, or reinforcement

In Tekla Structures, the position numbers assigned in the numbering are shown in marks and templates, for example.

. Reinforcing bars with different attribute values get different part marks.

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet