Hello!

Did you know that logged in users can see a lot more content?

2017 Table of Contents

Multiple Wire Size Mesh

Added June 1, 2017 by Tekla User Assistance tekla.documentation@trimble.com

Software version: 
2017

Multiple Wire Size Mesh

Multiple Wire Size Mesh

Multiple Wire Size Mesh creates reinforcement meshes with multiple reinforcing barreinforcement that represents a steel bar used to reinforce a concrete structure

The steel bars are usually ribbed and they are used to increase the tensile strength of concrete.

sizes. The created reinforcement meshreinforcement that represents a mesh of steel bars in two perpendicular directions

In Tekla Structures, the reinforcement mesh bars in one direction are called main bars and reinforcement mesh bars perpendicular to them are called crossing bars.

is optimized for a meshreinforcement that represents a mesh of steel bars in two perpendicular directions

In Tekla Structures, the reinforcement mesh bars in one direction are called main bars and reinforcement mesh bars perpendicular to them are called crossing bars.

welding machine. Multiple Wire Size Mesh can be used for slabs and wallplate that represents a structure such as a wall or roof panel

In Tekla Structures, a panel is created by picking two or more points.

In cast-in-place concrete the term wall refers to a concept similar to panel.

panels. The slabs and wall panels can be of any polygonal shape with any number of openings. The reinforcing bars in the mesh can be of different size, and the spacings between the bars can vary.

Objects created

  • Reinforcement meshes

Use for

Situation

Description

Three zones of longitudinal reinforcing bars

Before you start

Create a polygon slabplate that represents a concrete structure

In Tekla Structures, a slab is created by picking three or more points.

Slab may be part of a floor, for example.

or a wall panel with any number of openings. Enter zone values to define the width of the area to be reinforced in both the longitudinal and crossing directions. Each direction can be divided up to five zones.

Selection order

  1. Select the main part(1) part that exists in a building object and that determines the position number for the assembly or cast unit and the direction of assembly or cast unit drawings

    (1) Main part can be an assembly main part or a cast unit main part.

    (2) input part that the user selects first when creating a component

    (2) Connections and details always have a component main part.

    (slab or wall panel).

    The reinforcement mesh is created.

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet