Kingspan Autoform Two Sided (22)


Software version: 2017

Last updated October 9, 2018 by Trimble Solutions UK tekla.support.uk@trimble.com

Software version: 
2017
Environment: 
Not environment-specific

Kingspan Autoform Two Sided (22)

The Kingspan Autoform Two Sided connection is used to connect two Multichannels (compound or single) to a main member.

Before and after

Tekla Structures model before adding Kingspan Autoform Two Sided (22) Tekla Structures model after adding Kingspan Autoform Two Sided (22)

Notes

  • Any modification of the selected parts will cause this joint to be updated.
  • If specific values are entered under the Parameters tab, thus overriding the default settings then non standard parts may be created.
  • Length of the secondary member must be perpendicular to the main members length
  • If secondaries are single Multichannels, backs must align with toes facing the same way
  • Where secondaries are compound Multichannels, they must have a common centreline
  • Either top of steel or centre of the secondary members must align
  • The joint can only be applied to the web of the main member

Selection order example

  1. Main member
  2. Multichannel
  3. Multichannel
  4. Click middle mouse button

The order to select Tekla Structures model when adding Kingspan Autoform Two Sided (22)

See also

Kingspan cold rolled - Important information
Kingspan Autoform Two Sided (22) - Parameters tab
Kingspan Autoform Two Sided (22) - Bolts tab

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet