Kingspan Non-Standard Horizontal Cladding Support (34)


Software version: 2017

Last updated October 9, 2018 by Trimble Solutions UK tekla.support.uk@trimble.com

Software version: 
2017
Environment: 
Not environment-specific

Kingspan Non-Standard Horizontal Cladding Support (34)

The Kingspan Non-Standard Horizontal Cladding Support macrosaved series of actions that includes instructions for a program

Macros are located in the applications and components catalog. They are recorded or created manually and stored as .cs file in a folder defined with the advanced option XS_MACRO_DIRECTORY.

Macros can, for example, be used for creating drawings or reports.

Macros are sometimes used to run an application.

can be used to define individual G140/150 or L145 channel between two selected Multichannel rails or a Multichannel and an eaves beam.

Before and after

Tekla Structures model before adding Kingspan Non-Standard Horizontal Cladding Support (34) Tekla Structures model after adding Kingspan Non-Standard Horizontal Cladding Support (34)

Notes

  • Any modification of the selected parts will cause this macro to be updated.
  • Most of the data required for this macro is fixed by Kingspan and stored in a series of data files supplied with Tekla Structures. Where standard data is not applicable, then certain items can be modified through the Parameters tab of the properties panel, but it is also possible to tailor the data files to individual requirements. This would require assistance from Tekla Structures support.
  • Only one eaves beam may be selected for inclusion.
  • All rail lengths must be parallel.
  • Eaves beam must be parallel to rails and above the last rail.
  • Rails can be ‘toes up’ or inverted.

Selection order example

When selecting a position ensure Snap to nearest points (points on line) Snap to nearest points (points on line) button is turned on.

  1. Multichannel
  2. Multichannel or eaves beam
  3. Pick a position along the Multichannel

The order to select Tekla Structures model when adding Kingspan Non-Standard Horizontal Cladding Support (34)

See also

Kingspan cold rolled - Important information
Kingspan Non-Standard Horizontal Cladding Support (34) - Parts tab
Kingspan Non-Standard Horizontal Cladding Support (34) - Parameters tab

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet