Did you know that logged in users can see a lot more content?

Snap switches and symbols

Added August 31, 2016 by Tekla User Assistance tekla.documentation@trimble.com

Software version: 

Snap switches and symbols

Snap switches and symbols

Use the snap switches to control which positions you can pick in the model or drawing. By using snap switches, you can position objects precisely without having to know the coordinates. You can use snap switches whenever Tekla Structures prompts you to pick a point.

Click the snap switches on the Snapping toolbar to switch them on or off. If there is more than one point available to snap to, press the Tab key to cycle forward through the snap points, and Shift+Tab to cycle backwards through them. Click the left mouse button to select the appropriate point.

Main snap switches

The two main snap switches define whether you can snap to reference points or any other points on objects, for example part corners. These switches have the highest snap priority. If both these switches are off, you cannot snap to any positions, even if all the other switches are on.


Snap positions



Reference lines and points

You can snap to object reference points (points that have handles).


Geometry lines and points

You can snap to any points on objects.


Other snap switches

The table below lists the remaining snap switches and their symbols in the model and drawing.

Make sure that you do not have too many snap switches on when snapping, as it may easily lead to inaccuracies and errors in snapping. Be particularly careful when you use the Snap to any position snap switchswitch used for controlling what kind of points Tekla Structures snaps to

The user needs to activate snap switches to be able to pick different points, for example, line ends and intersections.

Snap switches help the user to pick points in order to position model objects precisely without having to know the coordinates or create additional lines or points.



Snap positions




Snaps to points and grid line intersections.

End points

Snaps to end points of lines, polyline segments, and arcs.


Snaps to centers of circles and arcs.


Snaps to midpoints of lines, polyline segments, and arcs.


Snaps to intersections of lines, polyline segments, arcs, and circles.


Snaps to points on objects that form a perpendicular alignment with another object.

Line extensions

Snaps to the line extensions of nearby objects, and reference and geometry lines of drawing objects.

Any position

Snaps to any position.

Nearest point

Snaps to the nearest points on objects, e.g. any point on part edges or lines.


Snaps to grid lines, reference lines, and the edges of existing objects.

Dimensions and marks

Snaps to annotation geometries in drawings.

Available only in drawings.


Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet