Did you know that logged in users can see a lot more content?

2016i Table of Contents

Drawing weld mark properties

Added August 31, 2016 by Tekla User Assistance tekla.documentation@trimble.com

Software version: 

Drawing weld mark properties

Drawing weld mark properties

In Weld Mark Properties dialog box you can view and modify the properties of a weld markmark that includes a set of selected property elements related to a weld

that has been manually added in a drawing.




a= design throat thickness, s= penetration throat thickness, or z= leg length


The size of the weld.


The type of the weld.

You can customize some of the weld type symbols, see Customize weld type symbols for more information.


The angle of weld preparation, bevels, or groove.

Tekla Structures displays the angle between the weld type symbol and the fill type contour symbol.


The fill type contour of a weld can be:

  • None

  • Flush

  • Convex

  • Concave


Tekla Structures displays the finish symbol above the weld type symbol in drawings. The options are:

  • G (Grind)

  • M (Machine)

  • C (Chip)

  • (Flush finished weld)

  • (Smooth blended weld face)


The length of a regular weld depends on the length of the connection between the welded parts. You can set the exact length of a polygon weld by, for example, defining the start and end points of the weld.


The center-to-center spacing of welds for non-continuous welds. Pitch is shown in the weld mark if the value is greater than 0.0.

To create a non-continuous weld, define the center-to-center spacing and the pitch of the welds. Tekla Structures calculates the distance between the welds as the pitch minus the length of the weld.

By default, Tekla Structures uses the – character to separate weld length and pitch, for example, 50–100. To change the separator to @, for example, set the advanced option XS_WELD_LENGTH_CC_SEPARATOR_CHAR to @.

Effective throat

The weld size used in weld strength calculation.

Root opening

The space between the welded parts.

Reference text

Additional information to appear in the weld symbol. For example, information about the weld specification or process.


Indicates whether only one edge or the entire perimeter of a face should be welded.

A circle in the weld symbol in drawings indicates the Around option has been used.


Indicates where the weld should be made.

Stitch weld

Set this option to Yes to create a staggered, intermittent weld.

Stitch welds are staggered on both sides of the welded part. Tekla Structures shows the weld type symbols as staggered in weld symbols.

If you set this option to No , a non- staggered intermittent weld is created. To show the pitch in a weld mark, set Pitch to a value greater than 0.0.


Search margin is the farthest distance Tekla Structures uses when searching for an empty space for the weld mark.

Minimal distance is the closest distance Tekla Structures uses to search for an empty space for a weld mark.

Quarter defines the areas Tekla Structures Tekla Structures searches for a space to place the weld marks.

Placing is the method used to place welds marks:

  • Free lets Tekla Structures decide the location and direction of the dimension based on the Direction settings.

  • Fixed allows you to place the weld at any point.

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
Average page rating: 5 (1 vote)
Refresh page after voting to show updated result.