Hello!

Did you know that logged in users can see a lot more content?

2016i Table of Contents

Example: Position dimensioning

Added August 31, 2016 by Tekla User Assistance tekla.documentation@trimble.com

Software version: 
2016i

Example: Position dimensioning

Example: Position dimensioning

Here are some examples of what the position dimensions look like in integrated dimensoning with different settings selected on the Position dimensions tab.

Dimensioning setting

Example

Position parts to is set to None.

Position parts to is set to Main part.

Position bolts to is set to Working points.

Secondary part is dimensioned By bolts.

Secondary part is dimensioned By parts.

Secondary part is dimensioned By both.

Secondary part is dimensioned By bolts.

Secondary part dimension direction is Neighbor part.

Position from is set to Work points.

Running dimensions start from the intersection of the main and secondary part (=work point)

Dimensions are aligned with the neighboring part

Main part bolt position is set to Off.

( Main part bolt internal dimensions is set to Internal on the Bolt dimensions tab.)

Main part bolt position is set to On.

( Main part bolt internal dimensions is set to Internal on the Bolt dimensions tab.)

By default, create minimum and maximum position dimensions are not created for bolts. For information on how to create these dimensions, see Add minimum and maximum position dimensions to bolts.

Main part skew position is set to Yes.

Skew position is set to Angle.

Centered part is set to Internal.

Centered part is set to Position.

Center bolt is set to Internal.

Center bolt is set to Position.

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet