Did you know that logged in users can see a lot more content?

2016i Table of Contents

Add dimensions to profiles

Added August 31, 2016 by Tekla User Assistance tekla.documentation@trimble.com

Software version: 

Add dimensions to profiles

Add dimensions to profiles

You can affect the way Tekla Structures dimensions different profiles in drawings. For example, you can have Tekla Structures always dimension round bars to the middle of the profile and large I profiles to the top.

To define dimension settings for profiles, you need to edit the dimension planes table dim_planes_table.txt.

  1. On the File menu, click Settings > Advanced options and go to the Dimensioning: Parts category.
  2. Set the advanced option XS_PART_DIMENSION_PLANES_TABLE as follows:


    This advanced option defines the path to the part dimension planes table.

  3. Open the dim_planes_table.txt file in any text editor, for example, Microsoft Notepad. The file is located in ..\Tekla Structures\<version>\environments\<environment>\profile.
  4. Edit the file contents and save the file.
  5. To use the new settings in drawings, restart Tekla Structures and recreate the drawings. Changing the file does not automatically update existing drawings.


Here is an example of a dimension planes table:



ProfType,MaxSize, middle,right, left, middle, right, left




The line beginning with 1 means that Tekla Structures always dimensions I profiles ( ProfType = 1) smaller than 300 mm ( MaxSize = 300) to the middle of the flange and to the right edge of the web, no matter how the part was created.

The line beginning with 7 means that Tekla Structures always dimensions round tubes ( ProfType = 7) to the middle of the profile

The ProfType numbers run in the same order as the profiles in the Profile cataloguser interface for displaying or modifying information in categorized lists

For example, profile catalog and shape catalog are catalogs.


  • 1 = I profile

  • 2 = L profile

  • 3 = Z profile

  • 4 = U profile

  • 5 = plate(1) part that represents a flat structure

    (1) In some contexts, for example in analysis, the term plate object may be used to refer to plates.

    (2) plate that represents a steel structure

    (2) Plate is mainly used as a connection piece or as a floor plate.

  • 6 = round bar

  • 7 = round tube

  • 8 = square pipe

  • 9 = C profile

  • 10 = T profile

  • 15 = ZZ profile

  • 16 = CC profile

  • 17 = CW profile

  • 51 = polygon_plate etc.

The value -1.0 in the MaxSize indicates that there is no size limit for the profile.

The asterisk after TRUE indicates that it is the default value.

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet