Hello!

Did you know that logged in users can see a lot more content?

2016i Table of Contents

Create check dimensions

Added August 31, 2016 by Tekla User Assistance tekla.documentation@trimble.com

Software version: 
2016i

Create check dimensions

Create check dimensions

In integrated dimensioning, you can create additional dimensions to check the accuracy of dimensions.

To create check dimensions, do any of the following:

To

Do this

Number in the image

Create check dimensions between outermost work points.

In the Dimensioning dialog box, click Part dimensions and set Main part work points to Yes.

Create check dimensions between outermost bolts.

In the Dimensioning dialog box, click Bolt dimensions and set Extreme bolts to Assembly or Main part.

Create check dimensions from outermost work point to first bolt.

In the Dimensioning dialog box, click Bolt dimensions and set Extreme bolts to Assembly or Main part and Extreme bolts to work points to Yes.

Create horizontal and vertical check dimensions between the work points in a skewed brace.

In the Dimensioning dialog box, click Position dimensions and set Main part skew position to Yes.

Create check dimensions between the work points, such as the intersections of main and neighbor part reference lines.

In the Dimensioning dialog box, click Position dimensions and set Position bolts to or Position parts to Working points or Both.

Create check dimensions to the bolt hole locations in the main part.

In the Dimensioning dialog box, click Position dimensions and set Main part bolt position to On.

Create knock-off dimensions.

In the Dimensioning dialog box, click Part dimensions and set Knock-off dimensions to On.

Quick feedback

The feedback you give here is not visible to other users. We use your comments to improve our content.
We use this to prevent automated spam submissions.
Content rating: 
No votes yet